Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 16-06-2014, 02:36 PM   #1
millinnium
Starter Motor
 
Join Date: Apr 2014
Posts: 5
Default Torque PID for Ford Focus

Gift from me because its so hard to find good info:

Name "ShortName" "ModeAndPID" "Equation" "Min Value" "Max Value" "Units" "Header"
Accelerator Pedal Position "ACC PEDAL POS" "22032b" "A/2" "%"
Air Cond Compressor State "AIR COND" "22099b" "A"
Battery Age "BATT AGE" "224027" "((A*256)+B)" "Days" "726"
Battery Charge "BATT%" "224028" "A/256*100" "%" "726"
Battery Temperature "BATT Temp" "224029" "A-40" "°C" "726"
Brake Fluid line Hydraulic Pressure "BFLHP" "222b0d" "A" "kpa"
Catalyst Temperature "CAT TEMP" "22f43c" "((A*256)+B)-40" "°C"
Clutch A Slip "CLUTCH A SLIP" "221ebb" "((A*256)+B)*(1/4)" "RPM"
Clutch B Slip "CLUTCH B SLIP" "221ebc" "((A*256)+B)*(1/4)" "RPM"
Clutch Open "CLUTCH STATE" "221eA0" "A&256"
Engine Total Distance "ENG DIST" "22dd01" "((A*256)+B)" "KM"
Fuel Level "FUEL LEVEL" "22f42f" "A/256*100" "%"
Fuel Pump Pressure Desired "FUEL PSI DESIRED" "2203dc" "((256*A)+b)*10*.145" "PSI"
Gear Commanded by Output State "GEAR" "221e12" "A" "Gear"
In Car Temperature "INCARTEMP" "22dd04" "A/8" "°C" "726"
In Gear "IN GEAR" "221e04" "A"
Inlet Air Temperature Fault "INLET TEMP" "220700" "A"
Lateral Angle "LAT °" "222b0c" "SIGNED(A)" "°" "ABS"
Lateral G "LAT G" "222b11" "((signed(A)*256)+B)*0.02" "g" "ABS"
Learned Relative Octane Adjust "OCTANE ADJ" "2203E8" "A/256*100" "%"
Longitude G "LONG G" "222b0c" "((signed(A)*256)+B)*0.02" "g" "ABS"
Max Diff between TP1 and TP2 "DIFF TP1 TP2" "2203A7" "A" "°"
Steering Wheel Angle "STWHEEL" "223302" "((signed(A)*256+b)/10-780" "°" "ABS"
Throttle Position (Desired) "TP D" "22091a" "((A*256)+B)*(100/8192)" "°"
Torque Control Request "TORQ CON" "2203AF" "A"
Trans Axle Gear Ratio Measured "GEAR RATIO" "221e16" "((A*256)+B)/4096" ":1"
Transmission Gear Engaged "GEAR ENGAGED" "221e1f" "A" "Gear"
Transmission Gear Mode "GEAR MODE" "221e23" "A" "Mode"
Transmission Temperature "Trans" "221E1C" "(((SIGNED(A)*256)+B)*(9/8)+320)/10" -40 260 "°C" "TCM"
ABS Wheel Speed 1 "ABS RFW" "222b06" "A" "KM/H" "ABS"
ABS Wheel Speed 2 "ABS LFW" "222b07" "A" "KM/H" "ABS"
ABS Wheel Speed 3 "ABS RRW" "222b08" "A" "KM/H" "ABS"
ABS Wheel Speed 4 "ABS LRW" "222b09" "A" "KM/H" "ABS"
Engine Knock "Knock" "2203ec" "signed(A)/2" "°"

millinnium is offline   Reply With Quote Multi-Quote with this Post
Old 16-06-2014, 02:50 PM   #2
FoxtrotGolfXray 5.0
Donating Member
Donating Member3
 
FoxtrotGolfXray 5.0's Avatar
 
Join Date: Mar 2007
Location: Heading thru Hell (Corner)
Posts: 8,313
Technical Contributor: For members who share their technical expertise. - Issue reason: Willingly providing technical info and documents, despite glitches. 
Default Re: Torque PID for Ford Focus

Be an even better gift if I had a decoding handbook so I could make head or tail of all that gibberish.....

Craig H
__________________
Labels are for jars, not for people.

Life is a journey, not a destination.

~~~~~~~~~~~~~~

Daily: 2013 FGII EcoLPi in Winter White
Play: 2015 FG X XR8 in Emperor Show' N Shine thread

Gone, but not forgotten: 2015 SZII petrol Titanium Territory in Emperor
FoxtrotGolfXray 5.0 is online now   Reply With Quote Multi-Quote with this Post
Old 16-06-2014, 04:04 PM   #3
millinnium
Starter Motor
 
Join Date: Apr 2014
Posts: 5
Default Re: Torque PID for Ford Focus

Lol, sorry, just copy it to Excel and you can see it easier, it is already in a format that can be saved as a csv format for torque app.
Example:

Long name:Accelerator Pedal Position
Short Name"ACC PEDAL POS"
PID "22032b"
Equation "A/2"
Unit "%"
Header = blank
millinnium is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:49 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL