|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
15-02-2011, 12:28 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2011
Posts: 6
|
hey guys im new to ford forums, joined today.. i have a 1987 kc laser as my little run about and a 1987 ke tx3 for my little project i bought for $400, since i bought it i found a display folder with over 7 grand of receipts the previous owner has spent on it.. some of them are for full pedders suspension, urethane bushes and full new steering arms etc.. also a new motor was put in a few years back the only thing stopping me from driving it is i needa replace the head gasket... it has full extractors back exhaust with hiflow cat and lukey mufflers..
i was wondering other than air intake which is my next on the to do list after head gasket what could i do other than turbo to give it some more power? thanks guys |
||
|
|
|
22-02-2011, 07:44 PM
|
#2 | ||
|
What a performer!
Join Date: Jul 2005
Location: SA, Northern Suburbs
Posts: 599
|
Mate no point with the N/A. Best you'll get out the 1.6L B6 is like 50-70kw? After loads of cash. Bite the bullet, convert it to the 1.8L BP Turbo from a KF/KH TX3. Engine will cost around $800, add another $1k to put it in properly and you have a little rocket.
__________________
1981 Ford Laser KA :: E5 :: 2002-2003 1989 Ford Laser KE TX3 :: BP :: 2003-2007 75fwkW 1990 Ford Laser KF TX3 :: BP :: 2010-2011 1991 Ford Laser KF TX3 :: BP-T :: 2011-2015 109fwkW 2007 Ford Falcon BF XR6 Turbo Ute :: Barra 245T :: 2014-2019 324rwkW 1998 Ford Falcon AU XR8 Ute :: Windsor V8 :: 2019-2020 2008 Ford Fiesta XR4 :: Duratec 150 :: 2021-* 1998 Ford Falcon AU XR6 :: HP Intech :: 2021-* |
||
|
|
|
|
09-03-2011, 11:30 AM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2011
Posts: 6
|
cheers vippin, ive decided there was no point modding current motor.. ive since come across a 89 ke tx3 turbs that has no gearbox which is a bit of a kick in the teeth really but he only wants 400 for the while car.. would i be able to put the 1.6 dohc b6t into my car and use my n/a gearbox? if not what am i lookin at for a gear box.. ( i can do all the labour myself
 )
|
||
|
|
|
|
28-03-2011, 08:42 PM
|
#4 | ||
|
Starter Motor
Join Date: Mar 2011
Posts: 2
|
Hi Guys,
New to this site any help would be much appreciated. I'm looking for a 1.8 turbo motor ECU & wiring harness to install in my KE laser wagon. I'm situated in Sydney I can be contacted on 0410324064 Greg. Thanks |
||
|
|
|
|
30-03-2011, 03:18 PM
|
#5 | |||
|
Starter Motor
Join Date: Mar 2011
Posts: 5
|
Quote:
jump on www.fordlaser.com post a WTB. and look thru the sale areas. |
|||
|
|
|
|
30-03-2011, 09:59 PM
|
#6 | ||
|
Starter Motor
Join Date: Mar 2011
Posts: 2
|
Will do.
Thanks |
||
|
|
|
power mods for ke tx3 n/a
Linear Mode
