Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 04-07-2009, 10:07 PM   #1
Forte
Regular Member
 
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
Default 2L cortina engine to MK2 escort

G'day i just bought a couple MK2 escorts which are a 1.6 auto, wanting to put a 2L manual in it, at the local wreckers they had a 2L te cortina engine, for $300 will this bolt straight in?
they also had a 2L man escort whole car, missing the carby and air filter, however they think the engine is blown/broken crank and are asking $800 for the car, i think thats a bit steep as its engine is buggered , any suggestions on what i should do, or any other ideas?


Last edited by Forte; 04-07-2009 at 10:26 PM.
Forte is offline   Reply With Quote Multi-Quote with this Post
Old 04-07-2009, 11:29 PM   #2
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

Cortina 2L sump is different to the 2L escort.


Did you have the space to buy both the 2L escort and the cortina motor, do the conversion and wreck the rest?
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2009, 12:26 AM   #3
atec77
FF.Com.Au Hardcore
 
Join Date: Sep 2005
Location: Brisbane
Posts: 3,568
Default

Quote:
Originally Posted by Forte
G'day i just bought a couple MK2 escorts which are a 1.6 auto, wanting to put a 2L manual in it, at the local wreckers they had a 2L te cortina engine, for $300 will this bolt straight in?
they also had a 2L man escort whole car, missing the carby and air filter, however they think the engine is blown/broken crank and are asking $800 for the car, i think thats a bit steep as its engine is buggered , any suggestions on what i should do, or any other ideas?
Sump is a little to far forward , you can either notch it or trim the back edge of the front assy 10mm and add some metal , best check which one is acceptable in your state . otherwise its pretty much drop and fit , although the 1600 is a zippier motor and revs way harder ( last one used to see 8k often) and the added weight tends to mean front springs and your steering a land barge
atec77 is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2009, 02:51 PM   #4
Forte
Regular Member
 
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
Default

Quote:
Originally Posted by rag top
Cortina 2L sump is different to the 2L escort.


Did you have the space to buy both the 2L escort and the cortina motor, do the conversion and wreck the rest?



yeah i have the space to get both, could i put the 2L escort sump onto the cortina motor? and would the 2L escort gearbox bolt straight on to it?
cheers
Forte is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2009, 03:30 PM   #5
Jimmyd
Banned
 
Join Date: Apr 2007
Posts: 734
Default

Sump and gearbox will bolt straight up - same engine in escort and cortina.

You have the added benefit of the auto trans tunnel being a bit larger than the manual trans tunnel - will malk bolting it al together ALOT easier.

You will need to trim the front radiator mounting panel - fairly easy to do and given you will have the escort shell donating the 2lt sump it will be pretty easy to figure out, will need to watch the alt wiring, etc cause that are on the other side of the engine for the 2lt.

Do yourself a favor and swap over the front struts from the 2lt escort into your car - larger springs and larger diameter tubes for the inserts, will be a straight swap over, front brakes are the same so you can pick the best rotors/caliper sets out of the two to fit up.

I'm sure there are about a million other things to wath for, but these are the main ones I can think off off hand.

Good luck with the project
Jimmyd is offline   Reply With Quote Multi-Quote with this Post
Old 05-07-2009, 06:55 PM   #6
Forte
Regular Member
 
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
Default

cheers thanks for that,
much appreciated!
Forte is offline   Reply With Quote Multi-Quote with this Post
Old 06-07-2009, 11:16 AM   #7
JamesR
FF.Com.Au Hardcore
 
Join Date: Jun 2006
Location: Traralgon, Vic
Posts: 577
Default

Quote:
Originally Posted by Forte
G'day i just bought a couple MK2 escorts which are a 1.6 auto, wanting to put a 2L manual in it, at the local wreckers they had a 2L te cortina engine, for $300 will this bolt straight in?
they also had a 2L man escort whole car, missing the carby and air filter, however they think the engine is blown/broken crank and are asking $800 for the car, i think thats a bit steep as its engine is buggered , any suggestions on what i should do, or any other ideas?
hey mate, mind sharing what wreckers?
i need some parts..

what you need to do to use a cortina motor is swap sump and oil pickup for escort one.
__________________
1977 MkII Escort Ghia.
2006 MY07 Subaru Liberty GT Spec B wagon.

my photo blog;
http://www.jamesruff.net
JamesR is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2009, 09:24 PM   #8
Forte
Regular Member
 
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
Default

i'm not sure of the name, i have the phone number at work, a mate told me about it. i can get it tomorrow for you. however when i rang it was the only escort they had.
what parts do you need? i may have some laying around.

Also, i bloke at work seems to think that a 2L cortina engine doesn't have a overhead cam? anyone clear this up? the motor i'm getting is from a TE cortina if that helps?
cheers
Forte is offline   Reply With Quote Multi-Quote with this Post
Old 07-07-2009, 11:54 PM   #9
rag top
FF.Com.Au Hardcore
 
rag top's Avatar
 
Join Date: Dec 2004
Location: ACT
Posts: 4,028
Default

2L cortina motor from TC through to TF is an OHC Pinto - same as the 2L OHC Pinto in the escort. Tell the bloke at work to go and do a google image search....
rag top is offline   Reply With Quote Multi-Quote with this Post
Old 10-07-2009, 06:11 PM   #10
Forte
Regular Member
 
Join Date: Jun 2009
Location: Moe town... cheers leski put us on the map!
Posts: 63
Default

Quote:
Originally Posted by JamesR
hey mate, mind sharing what wreckers?
i need some parts..

what you need to do to use a cortina motor is swap sump and oil pickup for escort one.
'

g'day mate sorry it took so long for me to reply, the sever was down??
it was a wreckers in warragul, ph. 56 23 5855, i am pretty sure i got the last one though sorry.
i may have some spare parts the you need?
Forte is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 12:23 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL