|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-07-2013, 08:18 AM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2013
Posts: 3
|
Hi Folks,
I'd like to add factory Cruise Control to my Series 3 AU and there is one advertised at the moment that states it is for a Series 1 only and won't work on a Series 2 or 3. Is this correct? If so, what is the difference? Also, if anyone has a lead on a cruise control set for my car, let me know. Cheers, Shorty. |
||
|
|
|
18-07-2013, 09:58 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
they are very different electrically and not worth the effort trying to modify, the electrical systems to the steering wheel are different making fitting S1 near on impossible.
S2/3 kits come up on eBay all the time for reasonable money
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
18-07-2013, 10:35 AM
|
#3 | ||
|
Starter Motor
Join Date: Jul 2013
Posts: 3
|
That's great, to have that confirmed. Thanks very much. I've noticed some factory Cruise Crontrol systems advertised as being for all AU series. I'll make sure I get one that has come out of a Series 2 or 3.
Thanks again, Shorty. |
||
|
|
|
|
18-07-2013, 11:10 AM
|
#4 | |||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
yes the do advertise for all AU because they don't know, the series ones have a large number of differences to the later cars including but not limited to
Quote:
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
|||
|
|
|
|
18-07-2013, 12:04 PM
|
#5 | ||
|
Starter Motor
Join Date: Jul 2013
Posts: 3
|
It's a lesson for young players and an easy trap to fall into when they are all called "AU". I only bought the AU III a few weeks ago and all the research I've done suggests just what you say, that the Series 2 was pretty much a whole different model to the Series 1.
|
||
|
|
|
Difference between AU I and AU II & III Cruise Control
Linear Mode
