Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 24-03-2018, 12:47 PM   #1
Vortex-98
Regular Member
 
Vortex-98's Avatar
 
Join Date: Nov 2016
Posts: 205
Default AU reverse gear can't handle load

Hey guys I'm having a problem with my reverse gear ,,if I park it on a steep driveway it doesn't have enough power at normal revs to back it up ...an if I stomp a bit to hard on the pedal it sounds like it's either breaking traction or the reverse gear is slipping ...any idea what is going on with it,,that the diff would do this only in reverse..
The car is auto..
__________________
[B]WTB (Syd)...AU 5.0 or xr8 4 speed auto transmission in good working cond /B]
Vortex-98 is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2018, 12:51 PM   #2
Maka
Au Falcon = Mr Reliable
 
Maka's Avatar
 
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Embodiment of the AFF spirit in his efforts with ACP. 
Default Re: AU reverse gear can't handle load

Dont Fairmonts have traction control, i think they do?

cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792

Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007)
Maka is offline   Reply With Quote Multi-Quote with this Post
Old 24-03-2018, 01:13 PM   #3
falconhell74
FF.Com.Au Hardcore
 
falconhell74's Avatar
 
Join Date: Jul 2011
Location: Serpentine W.A.
Posts: 1,639
Default Re: AU reverse gear can't handle load

sounds like the bands are slipping id have the trans serviced and adjusted
__________________
XC GS OLD SCHOOL MUSCLE

Audi A4 S-line quttro
Xc falcon
Previous fords-
xc falcon 500 ,250 x flow 3 speed
xc gs worked 250 x flow 4 speed
xa Fairmont 302 auto wagon
xb falcon 250 log auto 4 door
xb falcon 200 log auto ute
xc gs project - had to sell :-(
xc gs 302 4 speed 4 door
xc gs 351 auto 4 door
zf fairlane 302 auto
zk fairlane 250 x flow carb auto
zl fairlane 250 x flow EFI auto
xg ute , BA falcon dedicated gas
xd, xf x 3 ,ea,eb,ef,au x 3,telstar tx5
falconhell74 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 24-03-2018, 01:17 PM   #4
raceteam
FF.Com.Au Hardcore
 
Join Date: Nov 2013
Posts: 2,037
Default Re: AU reverse gear can't handle load

Check the fluid level in the trans before doing anything else.
raceteam is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 24-03-2018, 10:36 PM   #5
Vortex-98
Regular Member
 
Vortex-98's Avatar
 
Join Date: Nov 2016
Posts: 205
Default Re: AU reverse gear can't handle load

Ok thanks for the info , is the tranny dipstick under the bonnet?
Traction control maybe turned off, there's plenty of slip in the back tyres if u get my drift..
__________________
[B]WTB (Syd)...AU 5.0 or xr8 4 speed auto transmission in good working cond /B]
Vortex-98 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 24-03-2018, 11:40 PM   #6
Maka
Au Falcon = Mr Reliable
 
Maka's Avatar
 
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Embodiment of the AFF spirit in his efforts with ACP. 
Default Re: AU reverse gear can't handle load

If theres some serious kays on the box, maybe do a service & check the filter for clutch plate debris.

Check the fluid level for now & if its good & your sure there was slippage, i would do the above then go from there, good luck!

cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792

Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007)
Maka is offline   Reply With Quote Multi-Quote with this Post
Old 25-03-2018, 07:03 AM   #7
raceteam
FF.Com.Au Hardcore
 
Join Date: Nov 2013
Posts: 2,037
Default Re: AU reverse gear can't handle load

No dipstick.

https://fordforums.com.au/vbportal/v...?articleid=556

It's on a Territory, but same trans, so you get the idea.
raceteam is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 26-03-2018, 09:29 PM   #8
Vortex-98
Regular Member
 
Vortex-98's Avatar
 
Join Date: Nov 2016
Posts: 205
Default Re: AU reverse gear can't handle load

So to check the level of ATF in the tranny to be sure it has enough ,
how do I check the level an then how do I top it up????
__________________
[B]WTB (Syd)...AU 5.0 or xr8 4 speed auto transmission in good working cond /B]
Vortex-98 is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2018, 03:41 PM   #9
raceteam
FF.Com.Au Hardcore
 
Join Date: Nov 2013
Posts: 2,037
Default Re: AU reverse gear can't handle load

The link I already put in tells you how, and has photos.
raceteam is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2018, 03:57 PM   #10
Beastie
The Terrain Tamer
Donating Member3
 
Beastie's Avatar
 
Join Date: May 2013
Posts: 36,577
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Catering services for a bunch of layabouts and for being an all-round good guy whose sense of community goes above and beyond. 
Default Re: AU reverse gear can't handle load

As per the link, but a bit more info.

You can't check it.

The only thing you can do is pump more fluid into the tranny until it starts to come out of the hole you are filling it from.
__________________
Current Ride : A Ford owned D3...
Beastie is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 27-03-2018, 04:26 PM   #11
Maka
Au Falcon = Mr Reliable
 
Maka's Avatar
 
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Embodiment of the AFF spirit in his efforts with ACP. 
Default Re: AU reverse gear can't handle load

When the filler bolt is undone (after you've jacked the car up level), the fluid should be level with the bottom of the filler bolt thread. Plenty of old threads describing as such, good luck!

cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792

Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007)
Maka is offline   Reply With Quote Multi-Quote with this Post
Old 27-03-2018, 05:39 PM   #12
falconhell74
FF.Com.Au Hardcore
 
falconhell74's Avatar
 
Join Date: Jul 2011
Location: Serpentine W.A.
Posts: 1,639
Default Re: AU reverse gear can't handle load

Use a single hex socket , 9 times out of 10 this bolt is extremely tight and probably already half rounded from the last attempt , its a PITA
__________________
XC GS OLD SCHOOL MUSCLE

Audi A4 S-line quttro
Xc falcon
Previous fords-
xc falcon 500 ,250 x flow 3 speed
xc gs worked 250 x flow 4 speed
xa Fairmont 302 auto wagon
xb falcon 250 log auto 4 door
xb falcon 200 log auto ute
xc gs project - had to sell :-(
xc gs 302 4 speed 4 door
xc gs 351 auto 4 door
zf fairlane 302 auto
zk fairlane 250 x flow carb auto
zl fairlane 250 x flow EFI auto
xg ute , BA falcon dedicated gas
xd, xf x 3 ,ea,eb,ef,au x 3,telstar tx5
falconhell74 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Reply


Forum Jump


All times are GMT +11. The time now is 12:17 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL