|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-05-2012, 05:55 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
When changing pads on a AU series 2 with ABS do I need to undo the caliper bleed nut be for pushing the brake piston back to install new pads. If I do should I clamp the brake hose leading to the caliper before undoing the bleed nut. Any advise would be appreciated.
|
||
|
|
|
26-05-2012, 06:48 PM
|
#2 | ||
|
Walking with God
Join Date: Mar 2005
Location: Melbourne
Posts: 7,321
|
No need to touch the bleed nipple at all. You only touch this if you're flushing/changing fluid, but of course you'd do this after the pad change.
You just push the pistons back in with a g-clamp. Use one of the old pads so you don't wreck anything. Too easy! GK
__________________
2009 Mondeo Zetec TDCi - Moondust Silver 2015 Kia Sorento Platinum - Snow White Pearl 2001 Ducati Monster 900Sie - Red Now gone! 1999 AU1 Futura Wagon - Sparkling Burgundy On LPG Want a Full Life? John 10:10 |
||
|
|
|
|
26-05-2012, 06:51 PM
|
#3 | ||
|
Regular Member
Join Date: Dec 2011
Location: Melbourne, VIC
Posts: 175
|
Undo your caliper from one end of the slides, then tilt it up, use G clamp 2 compress the piston. don't touch line or bleeder nipple.
|
||
|
|
|
|
26-05-2012, 07:17 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Perth
Posts: 1,794
|
If in doubt watch some youtubes, if still in doubt get a professional to do it.
__________________
Current Rides: 2017 Ford Mustang 2020 Ford Everest Sport Past Rides: 2017 Kia Stinger GT 2008 FG XR6 Sedan 2008 FG G6E Sedan 2004 BA XR8 Sedan 2008 BF XR6 Turbo Sedan 2004 BA XR8 Sedan 2003 BA XR8 Ute 2003 BA XR6 Sedan |
||
|
|
|
|
26-05-2012, 10:01 PM
|
#5 | ||
|
Regular Member
Join Date: Jun 2010
Posts: 66
|
Thanks for the advice.
Cheers |
||
|
|
|
Changing pads on AU series 2 with ABS
Linear Mode
