|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-12-2006, 04:42 PM
|
#1 | ||
|
Starter Motor
Join Date: Nov 2006
Posts: 26
|
Hi, I'm going to be changing the front brake pads on my au3 sedan. It will be the first car I have done this on with ABS, is there anything that needs to be done differently than normal? I was going to push the pistons back in with a G Clamp and then take fluid out of the resevoir with a syringe if neccacarry. Is this the way to go?
|
||
|
|
|
05-12-2006, 04:57 PM
|
#2 | ||
|
T3/Sprint8
 
Join Date: Jan 2005
Location: Australia
Posts: 16,567
|
yep no worries just warning you brake fluid is high temp not high buzzzzz......
Sorry mate yes thats fine. Though I never thought about a syringe for the overflow lol....good idea need to be a big bugga hehe
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
|
|
|
AU3 Brake Pad Change question
Linear Mode
