fg icc reverae camera

[slim1107]

what cabling is required to retro fit a reverse camera in my fg xr6
i have upgraded to the colour screen but unsure if the kit you sell incorporates all the wiring that i need

[FADI75]

Originally Posted by slim1107

what cabling is required to retro fit a reverse camera in my fg xr6
i have upgraded to the colour screen but unsure if the kit you sell incorporates all the wiring that i need

hi

see link below

this is an ids cam kit,once its fitted then you will need to enable camera at ford dealer using their IDS and if u are in melbourne we can do it here at ASL

http://www.asllogistics.com/product....9&cat=0&page=1

cheers

ASL

[slim1107]

not sure what the link was?
does this mean i have to buy this and then buy the camera?

[FADI75]

Originally Posted by slim1107

not sure what the link was?
does this mean i have to buy this and then buy the camera?

hi

our kit comes complete with the camera with all required to work on the color screen

cheers

fadi75

[sxckevo]

Hey there rather than starting a new thread i thought i'd ask here. Do you sell just the wiring loom if i already have a camera? its a stock ford camera.

Cheers kev

[FADI75]

Originally Posted by sxckevo

Hey there rather than starting a new thread i thought i'd ask here. Do you sell just the wiring loom if i already have a camera? its a stock ford camera.

Cheers kev

hi

if u are after the ids camera kit where u will have to enable screen from a ford dealer using their ids the kit comes complete with camera

if u want an interface kit RGB you can purchase on line www.aslautomedia.com SKU FG500 or call us 0397991444

cheers

ASL

[stevieb1]

Hi there, I visited a local Ford dealer,to have a look at their reverse camera I really had to look to see it,it is neatly tucked up above number plate, I know you fit Interface RGB kits,but could I still have the RGB kit hooked up to Factory Camera,meaning if I just had a factory camera nothing else,would the standard factory wiring loom in the boot have the extra wire already there to connect a camera down the track,seems odd for Ford to have two wiring looms for the same model,as well there is a rubber boot covering the hole where the factory cam would be.I just think the factory
camera and how it is neatly tucked up,looks nice,I must admit I haven't seen one of yours, but if it sit's above number plate,can you still have number plate cover, or is it attached to the area between the numberplate lights.Would like to see the finished product to make up my mind,cheers.

[FADI75]

Originally Posted by stevieb1

Hi there, I visited a local Ford dealer,to have a look at their reverse camera I really had to look to see it,it is neatly tucked up above number plate, I know you fit Interface RGB kits,but could I still have the RGB kit hooked up to Factory Camera,meaning if I just had a factory camera nothing else,would the standard factory wiring loom in the boot have the extra wire already there to connect a camera down the track,seems odd for Ford to have two wiring looms for the same model,as well there is a rubber boot covering the hole where the factory cam would be.I just think the factory
camera and how it is neatly tucked up,looks nice,I must admit I haven't seen one of yours, but if it sit's above number plate,can you still have number plate cover, or is it attached to the area between the numberplate lights.Would like to see the finished product to make up my mind,cheers.

hi

our kit comes complete with the harness required, you can option the ids camera kit as well if you wish where it does not need the interface rgb kit, the ids camera once its fitted then a ford dealer can enable camera for you on color screen by using their ids, if u still intrested camera kit with interface rgb if you car have factory reverse sensors then this kit will not work. if you email me directly fadi@aslautomedia.com i can email you pictures and more info about the kits. or pls call 0397991444


cheers

fadi75