|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
04-06-2011, 03:33 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Melb, Vic
Posts: 1,088
|
For those who have changed rear rotors, did you guys use a deep socket to get the nut off the hub thread? Anyone know whats size socket (mm) it is?
 |
||
|
|
|
04-06-2011, 03:44 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Location: In the Castle having a beer & a chill
Posts: 1,230
|
I think from memory you just undo the countersunk screw and belt the old rotor off,ive got the 3/4 drive imperial socket size if you need me to check it i can if you want to remove the hub.
__________________
T3 Hardcore |
||
|
|
|
|
04-06-2011, 04:00 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Melb, Vic
Posts: 1,088
|
Yeh i removed the screw and i tried whacking the rotor and levering it with a bar and the rotor wasnt budging. So i thought the pack nut was holding it in and didnt have the tools to get it off at the time. So i just put it back together to do another time.
Il just have to put a bit more muscle into it if by the sounds of things  . Thanks
|
||
|
|
|
|
04-06-2011, 04:00 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jun 2009
Location: In the Castle having a beer & a chill
Posts: 1,230
|
__________________
T3 Hardcore |
||
|
|
|
|
04-06-2011, 04:06 PM
|
#5 | |||
|
Performance Inc.
Join Date: Aug 2008
Location: In a cave
Posts: 2,554
|
Might need to back off the hand brake as there may be a bit of lip iside holding it on.
__________________
In The Garage...  FPV Super Pursuit Build no 0080/91 Lotus Exige S/C S240 Kart Hasse Chassis 100J Power Quote:
|
|||
|
|
|
|
04-06-2011, 04:09 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Newcastle NSW
Posts: 7,890
|
The rotor rusts onto the hub. You need to soak it good with Rost-off or similiar. Then get under the car with a lump of 3x2 hardwood and a big hammer
__________________
T3 TL50 #147 Silhouette Auto ESS - Brembos - Last of 3 in T3 spec, only AUIII TL50 ever built -14.2 sec @ 98mph bog stock. Only customer ordered T3 TL50 built, only LWB sedan plated AUIII and the last performance enhanced LWB sedan built by Ford Aust. AUII Fairlane Ghia Sportsman 5.0L in Blue Pearl OWN THE ROAD |
||
|
|
|
|
04-06-2011, 04:31 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Melb, Vic
Posts: 1,088
|
thanks alot guys! Appreciate the help, looking at that thread now.
|
||
|
|
|
Rear IRS pack nut
Linear Mode
