Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 04-03-2008, 06:19 PM   #1
wesdrum
Starter Motor
 
Join Date: Mar 2008
Posts: 6
Default 6 CD Stacker Problem

Hi,
I have been having a problem with 6 disc CD stacker out of 99 Laser KN GLXI it hasnt been reading CD's
I have recently bought another stacker off ebay which is from EF Falcon.
The connection plug is the same but the new unit is not reading discs, powers up ok.

P/N for Laser stacker 14781760
P/N for Falcon stacker 14781761

Has it got anything to do with Pin configuration of the cable? or is it security code related?
Thanks

wesdrum is offline   Reply With Quote Multi-Quote with this Post
Old 06-03-2008, 05:31 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

if the power cables are correctly connected to the right wires

one constant the other acc

the constant power should hold the code in memory for the stacker
enter the code with acc on then turn off
if the code doesnt hold
then the wires are not correct or it is a faulty radio memory chip

nothing to do with the speakers yet
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 12-03-2008, 04:44 PM   #3
wesdrum
Starter Motor
 
Join Date: Mar 2008
Posts: 6
Default

it appears the radio doesnt have a security code. I have called Ford and they have advised me that there may be compatibility issues with the stereo and stacker.
Have given them the P/N and serial number of the stacker and they are going to check for me
wesdrum is offline   Reply With Quote Multi-Quote with this Post
Old 12-03-2008, 06:52 PM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

ok keep us posted
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2008, 05:39 PM   #5
wesdrum
Starter Motor
 
Join Date: Mar 2008
Posts: 6
Default

Well after a few attempts have been unable to get anywhere with ford so have given up and installed a new head deck.

So now have 2 stackers and one head unit and cant play a CD between them hehe
wesdrum is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2008, 12:14 PM   #6
Frances
Frances
 
Join Date: Mar 2008
Posts: 3
Default

I'm having the same problem in my 2001 Laser. The CD stacker is P/N 14781760 and is connected to the car's original radio/cassette player. Out of my entire collection it only reads one CD - I keep getting an E9 message on the others. The part was manufactured in 2001 so I'm assuming that it is struggling with more modern CD manufacturing techniques. I'm at a loss on what to do as well, apart from just using my iPod in the car.
Frances is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:24 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL