Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Ford Coupe Club of Australia > Coupe Restoration & Build

Reply
 
Thread Tools Display Modes
Old 24-01-2012, 08:15 AM   #1
FDCOOP
Phantom coupe
 
FDCOOP's Avatar
 
Join Date: Aug 2008
Location: Sydney
Posts: 42
Question AOD in xc coupe

Hey guys building an xc coupe, has anyone put an aod in one before? any major hassles? clearance issues? linkage issues? etc......

__________________
PX ranger
XC Gxl Coupe under build....
2011 MV Agusta 1090rr Brutale
x1 full time toy addiction.
FDCOOP is offline   Reply With Quote Multi-Quote with this Post
Old 24-01-2012, 08:56 PM   #2
phantom_87
FF.Com.Au Hardcore
 
phantom_87's Avatar
 
Join Date: Aug 2006
Posts: 725
Default Re: AOD in xc coupe

I worked with 2 chaps 1 had an XY and the other XD both ran aod transmissions. No modifications were required bolted straight in as their dimensions are similar to an FMX..Was informed you can use the existing xmember to the AOD and FMX tailshaft but cannot say for sure.I was at one stage going to fit one my coupe but now going for the T56
__________________
445RWKW of kennebell goodness
phantom_87 is offline   Reply With Quote Multi-Quote with this Post
Old 24-01-2012, 09:13 PM   #3
gcg2503
FF.Com.Au Hardcore
 
Join Date: Mar 2008
Location: Melbourne
Posts: 10,838
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always adding valued comments,  never involved in any disputes. A credit to this forum. 
Default Re: AOD in xc coupe

Friend has one in his P6 LTD and he loves it
gcg2503 is offline   Reply With Quote Multi-Quote with this Post
Old 25-01-2012, 08:34 AM   #4
FDCOOP
Phantom coupe
 
FDCOOP's Avatar
 
Join Date: Aug 2008
Location: Sydney
Posts: 42
Default Re: AOD in xc coupe

Thanks for the feedback fellas every bit helps.
This forum is the best.
__________________
PX ranger
XC Gxl Coupe under build....
2011 MV Agusta 1090rr Brutale
x1 full time toy addiction.
FDCOOP is offline   Reply With Quote Multi-Quote with this Post
Old 16-02-2012, 10:55 AM   #5
Flogginit
Regular Member
 
Flogginit's Avatar
 
Join Date: Mar 2010
Location: Perth W.A.
Posts: 286
Default Re: AOD in xc coupe

a mate had one in his XC no issues as far as I am aware however He used the mustang Tbar because the linkages were on the wrong side to use the standard TBar. If your running a B&M it shouldnt matter as they use cable anyway.
Flogginit is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 05:34 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL