|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
13-03-2016, 03:14 AM | #1 | ||
Starter Motor
Join Date: Mar 2016
Posts: 2
|
Hello there,
i have Ford Festiva 4 door hatchback 1995 model. i need to change its manual transmission fluid. could someone help me, i know there is a Nut down there. but how to put fluid back in? does anyone have workshop manual? thanks. |
||
22-07-2016, 01:51 AM | #2 | ||
Starter Motor
Join Date: Jan 2014
Posts: 10
|
Remove the speedo drive with a 10m spanner. You may have to replace the O Ring.
What oil are you going to use ? |
||
22-07-2016, 06:05 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: May 2016
Posts: 1,828
|
As above description through the speedo drive i used auto trans fluid in the manual box as that that is what the book recomended on the festi i had. I rate festi's highly bloody good cars
|
||
22-07-2016, 09:19 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Jan 2012
Posts: 1,747
|
My festiva has done 500,000 trouble free Km's. I used Castrol Dex 3 (yes it's an auto trans fluid) but is what's recommended in the lube guide. I think it holds 3.4 litres from memory and I always change the alloy plug washer too.
Cheers Ryan
__________________
XA Falcon 500 Hardtop Build Thread |
||
22-07-2016, 10:11 PM | #5 | ||
Starter Motor
Join Date: Jan 2014
Posts: 10
|
Here is what confuses me about the recommended gear oil.
I have another workshop manual for the Festiva by KIA. Not Australian btw. It's recommended oil is: Grade: API Service GL-4 Viscosity: SAE 75W/90 That is a very thick gear oil. Why does KIA recommend one oil and Ford Australia recommends another being the Dexron in both Auto and Manual ? The manual came in a PDF download and is by KIA. The Festiva ( Australia ) Owner's Manual says Dexron. |
||
23-07-2016, 09:41 AM | #6 | ||
FF.Com.Au Hardcore
Join Date: May 2016
Posts: 1,828
|
Is the gearbox noisy? What is in there now? I changed the oil in my festi cause the gearbox was noisy and thought it might of had the wrong oil in it. It was a 2000 model and should of had auto trans oil in it not the gear oil that was in it.
Imo i would put what the handbook that come with car says as ford aus would had to warranty them back in the day so they wouldnt use something that was going to cause them grief. |
||
23-07-2016, 01:02 PM | #7 | ||
Starter Motor
Join Date: Jan 2014
Posts: 10
|
To find the correct answer or explanation, it may go beyond the scope of DIY persons, and ask at engineering level.
What's considered is the type of gear cuts, (angles ), synchro rings and oil seal types. Even if one tries a step down to a lighter grade of gear oil, due to the design of the box, it may have to be Dexron in Australia and proper gear oil elsewhere. I also read somewhere, that it's rumored Ford Australia insisted KIA motor Company use Dexron from a marketing angle. If it is marketing, then I hope to get to the truth of the matter on purely engineering reason. If, your gearbox is making noises after using gear oil when it is suggested to use Dexron, then damage is already done. If everyone else uses Dexron and there have been no issues, then maybe it is what it is, Dexron in Australia for both Manual and Auto. Remember the Mini back in the day, it uses Motor oil for engine, gearbox and diff cos everything is in one whole unit. When the engine oil was drained, below the crankshaft is the gearbox and diff. I think it comes down to type of gears and angles of the gears being cut to suit the oil. Someone with engineering knowledge may be able to offer a light on this trivia |
||
23-07-2016, 02:50 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: May 2016
Posts: 1,828
|
Yeah peteb i hope the person who asked the question originally gets the correct oil in their gearbox. Myself im a big stickler for putting what the book in the glove box says to use.
|
||
24-07-2016, 05:42 PM | #9 | ||
Regular Member
Join Date: Jul 2008
Posts: 338
|
If you still have the owners manual,then use the oil that it specifies.Service refill capacity is 2.5 litres.You can also do a quick search online ,just key in the brand of oil you prefer to use and type the word netlube after it(eg Castrol netlube),then key in your car's details and it will list the correct fluids to use for your car.
|
||
24-07-2016, 08:02 PM | #10 | ||
vbvbvb088
Join Date: Oct 2009
Location: Melbourne.
Posts: 347
|
Have exact same car and did this...be gentle when removing the speedo cable and attached speedo gear. Place to side and fill up. The drain bolt easy as to access however mine was so tight not even a brute could not remove it. In the end used a impact wrench which zipped it off in microseconds.... also car must be perfectly flat and level.
|
||