Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Mondeo

Reply
 
Thread Tools Display Modes
Old 15-07-2018, 04:07 PM   #1
cobrin
Challenge Accepted!
 
cobrin's Avatar
 
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
Default Blown Globe H7

Man!!! I had a blown globe lastnight, these are the original set when I had bought the vehicle. I had replaced all the globes when I got home but the Nava Intense set had one blow ages ago and as they're a white light colour temp I put the original set in.

This time I'm not buying another $80-100 set, after looking a SCA and Repco sales catalogue I decided to try out the cheapest so Repco H7 Plus30 for $16ea. Bought two and they're fitted will see how I go on these for light and longevity. At least if on blows I'll have the original halogen for the spare if it doesn't look off.

(obviously Repco don't manufacture bulbs themselves but there's no marking to see whom makes them, they look nearly identical to the German made Phillips original. Difference being the terminals in how they're affixed, Phillips pressed and Repco seem to be soldered.)
__________________
Undecided replacement...
[SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD]
cobrin is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2018, 04:50 PM   #2
.:4:.
Kicking back
 
Join Date: Dec 2013
Location: Western sydney
Posts: 8,689
Default Re: Blown Globe H7

Could be worse, as a favour I changed a headlight lamp for a client (no I dont work with cars) and a generic repco 55w halogen for a vy holden (a j11) was $55 for a single. Halogens output a lot of heat so be careful and never touch the glass. The oils from your skin make them heat up unevenly and the glass can crack.
.:4:. is online now   Reply With Quote Multi-Quote with this Post
Old 15-07-2018, 07:08 PM   #3
rondeo
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 805
Default Re: Blown Globe H7

Best to use globes with thicker elements, as used in trucks.


I've 200000km on the same globes, oem.


Next globes will be the cheapest, I'd rather see where I'm going than dazzle them in front.
rondeo is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2018, 07:52 PM   #4
ivorya
Mad Scientist!
 
ivorya's Avatar
 
Join Date: Jan 2005
Location: Newcastle
Posts: 2,862
Default Re: Blown Globe H7

I used this site to get some globes,

https://www.carbulbsdirect.com/vehic...ralia/ford-aus

quite cheep and at my place in less than a week.
ivorya is offline   Reply With Quote Multi-Quote with this Post
Old 15-07-2018, 10:50 PM   #5
cobrin
Challenge Accepted!
 
cobrin's Avatar
 
Join Date: Jan 2006
Location: Under the Southern Cross
Posts: 882
Default Re: Blown Globe H7

Quote:
Originally Posted by rondeo View Post
Best to use globes with thicker elements, as used in trucks.


I've 200000km on the same globes, oem.


Next globes will be the cheapest, I'd rather see where I'm going than dazzle them in front.

that's the interesting bit, side by side, identical, down to the glass tube diameter, element ([to the eye] even down to the angles of the legs). I hope the Repco set do alright personally.

ivorya that's a good site I'll have to bookmark it for later.
__________________
Undecided replacement...
[SOLD] -2009 MB Mondeo Zetec TDCI- [SOLD]

Last edited by cobrin; 15-07-2018 at 10:59 PM.
cobrin is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 22-07-2018, 07:35 PM   #6
NZ XR6
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Location: Auckland, NZ
Posts: 1,266
Default Re: Blown Globe H7

If I remember correctly, OE are Philips long life bulbs.

I've tried Philips and Osram high ouput bulbs. Philips last about twice as long.
__________________
MB Mondeo TDCi wagon, sea grey, on MAK Invidia 16" wheels.
NZ XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 22-07-2018, 08:03 PM   #7
GO FURTHER
Moderator
 
GO FURTHER's Avatar
 
Join Date: Jan 2014
Location: Melbourne
Posts: 7,940
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Fitting New Iridium Plugs & the state of the old ones - (Photo Essay) 
Default Re: Blown Globe H7

See my post on this subject below.
Philips make the Ford OEM H7 globes.

https://fordforums.com.au/showpost.p...&postcount=311
GO FURTHER is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Reply


Forum Jump


All times are GMT +11. The time now is 05:47 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL