Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 30-03-2011, 01:30 PM   #1
deesun
FF.Com.Au Hardcore
 
deesun's Avatar
 
Join Date: Jan 2005
Posts: 4,167
Default Contra lane on F3 still needs work.

Another thread prompted me to post this one. Last Saturday at 330am a truck travelling south towards Sydney at near the top of the hill after Ourimbah lost a 45ft concrete pilon. We were travelling north at approx 11am. From before we entered the F3 at Waroongah the overhead signs said long delays, during the next half hour or so heading towards the area we were checking iphone for alternate routes but we decided to continue. We were held up for about an hour and a half in a 7km traffic jam. No probs there, our fault, but when we were in that jam the news reports were saying our side was 7km long and only 100mtrs on the crash side WTF? When we got to where the lanes were changed we found no traffic on our side comming from the other side, our side reduced from 3 to 1 lane. Whilst in the jam I also noticed the southbound traffic was seemingly flowing quite well. Why was our side reduced to 1 lane? Why were we being penalised so much when we could have been given 2 lanes of 3 not 1. Why had our side been allowed to bank up for 7k when little or no hold up on the other side? The radio reports from the helicopters above were all saying less than 1k southbound and 7k northbound during that hour and a half. I have travelled the F3 many times and have found that when the signs say long delays or expect delays that this isnt always the case. Nowadays they give travel times for sections of the freeway so why can't they say approx how long the delay is. It's obvious the contra lane system still needs work.

__________________
igodabigblackshinycar and I relented and allowed a BMW into the garage.
deesun is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 02:24 PM   #2
Fev
FF.Com.Au Hardcore
 
Fev's Avatar
 
Join Date: Feb 2007
Location: Cattai, Sydney
Posts: 7,701
Default Re: Contra lane on F3 still needs work.

I had to drive up to Copa to a friends place at about 4:00pm. The signs and warnings were still in place, the radio still reporting delays and so i chose to go on the old Pac highway up. Ended up jumping back onto the F3 at Brooklyn seeing numerous signs saying long delays and avoid the F3. Did not see an inch of banked up traffic the entire way. Would have saved 15min drive if the signs had said where the traffic was supposed to bloody start.

Basically the answer to your question is they are bloody hopeless at dealing with F3 accidents.
__________________
1992 EBII Fairmont Ghia 4.0l <---Click for the Gallery!
Insta@mooneye_ghia
White on bright red smoothies with thick whitewalls. Cruising around to some rockabilly
Fev is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 05:15 PM   #3
sneaky
FF.Com.Au Hardcore
 
sneaky's Avatar
 
Join Date: Aug 2006
Location: Newcastle
Posts: 1,061
Default Re: Contra lane on F3 still needs work.

i went past the truck incident at about 6am heading south and saw all the cops/towies/truck people standing around looking at it..

the i headed north (home from work) at about 3pm and heard about the looong traffic jams because of an acco, i didn't think it could still be the same truck causing the problems 8 hours later.. then i heard the rta had a 'specialist' crane on it's way to the truck - really it takes 8 hours for some genious to realise they will need a crane to lift the truck and actually call one!!


once again there needs to be some butt kicking for all the bureaucrats involved in the process of controlling traffic on the F3, but i guess nothing will happen and next accident will see huge lines of traffic again..
__________________
-Tim
sneaky is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 05:30 PM   #4
The G6ET Spot
FF.Com.Au Hardcore
 
Join Date: Oct 2005
Posts: 3,412
Default Re: Contra lane on F3 still needs work.

The biggest problem for them would have been getting hold of the crane large enough to lift the beam.

Takes quite a large crane to lift 45 tonne
The G6ET Spot is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 06:39 PM   #5
Keepleft
Mot Adv-NSW
 
Keepleft's Avatar
 
Join Date: Jun 2005
Location: Lake Macquarie, NSW
Posts: 2,153
Default Re: Contra lane on F3 still needs work.

UHF.

Plus check those cameras periodically.
__________________
ORDER FORD AUSTRALIA PART NO: AM6U7J19G329AA. This is a European-UN/AS3790B Spec safety-warning triangle used to give advanced warning to approaching traffic of a vehicle breakdown, or crash scene (to prevent secondary). Stow in the boot area. See your Ford dealer for this $35.95 safety item & when you buy a new Ford, please insist on it! See Page 83, part 4.4.1 http://www.transport.wa.gov.au/media...eSafePart4.pdf
Keepleft is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 11:08 PM   #6
351EL
Regular Member
 
Join Date: Apr 2006
Location: Far north Queensland
Posts: 211
Default Re: Contra lane on F3 still needs work.

You poor thing.
I wish we had roads wide enough that we could fit 2 trucks going in different directions side by side with out going on the dirt.
351EL is offline   Reply With Quote Multi-Quote with this Post
Old 30-03-2011, 11:25 PM   #7
burnz
VFII SS UTE
 
burnz's Avatar
 
Join Date: Apr 2007
Location: Central Coast
Posts: 6,353
Default Re: Contra lane on F3 still needs work.

the irony is the traffic flowed perfectly in both direction until the RTA got involed.
__________________
I don't often hear the sound of a screaming LSX.
But when I do, So do the neighbours..
GO SOUTHS
burnz is offline   Reply With Quote Multi-Quote with this Post
Old 31-03-2011, 01:30 AM   #8
deesun
FF.Com.Au Hardcore
 
deesun's Avatar
 
Join Date: Jan 2005
Posts: 4,167
Default Re: Contra lane on F3 still needs work.

Quote:
Originally Posted by Keepleft
UHF. Plus check those cameras periodically.
I guess you are sugesting I buy a UHF set to keep up to date with traffic incidents. Sorry i have no idea what you mean about the cameras. RTA spend millions for signage and manpower and other tech yet I am supposed to buy a UHF set? Sorry KL I don't agree. I do see they would have trouble getting the correct crane as this is specialist equipment but to know that one side of the road is banked up 7k and the other less than1 only takes a pair of eyes. Oh and a care factor, of which they have none, same as brains.
__________________
igodabigblackshinycar and I relented and allowed a BMW into the garage.
deesun is offline   Reply With Quote Multi-Quote with this Post
Old 31-03-2011, 01:38 AM   #9
deesun
FF.Com.Au Hardcore
 
deesun's Avatar
 
Join Date: Jan 2005
Posts: 4,167
Default Re: Contra lane on F3 still needs work.

Quote:
Originally Posted by 351EL
You poor thing.
I wish we had roads wide enough that we could fit 2 trucks going in different directions side by side with out going on the dirt.
1. You probably would have if your roads carried as much traffic as the F3 through the central coast. 2. I didn't think there was any reason to make such a smart ar__d comment.
__________________
igodabigblackshinycar and I relented and allowed a BMW into the garage.
deesun is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 03:34 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL