AU1/2/3 Ignition

**mad2** · 06-07-2022, 08:48 AM

Hi all.

would i be correct in stating that the AU series [from series 1] went back to the coil pack from the coil/dizzy of the previous EL?. i'm pretty sure they did, however i want to be sure i don't put my big foot in me mouth

Thanks

**mad2** · 07-07-2022, 08:51 PM

Quote:

Originally Posted by mad2

Hi all.

would i be correct in stating that the AU series [from series 1] went back to the coil pack from the coil/dizzy of the previous EL?. i'm pretty sure they did, however i want to be sure i don't put my big foot in me mouth

Thanks

welll . . . . ...... i'm going with the yes comments then

arm79 · 07-07-2022, 09:04 PM

I with the rest of the crowd.

Yes they did go back to coil packs.

What I didn't know and have just learned is the AU1 shared the coilpack with the EF. Later AU2/3 used a different coilpack.

https://www.tiperformance.com.au/pro...ignition-coil/

Different plugs and greater coil output.

**mad2** · 07-07-2022, 09:22 PM

Quote:

Originally Posted by arm79

I with the rest of the crowd.

Yes they did go back to coil packs.

What I didn't know and have just learned is the AU1 shared the coilpack with the EF. Later AU2/3 used a different coilpack.

https://www.tiperformance.com.au/pro...ignition-coil/

Different plugs and greater coil output.

that's what i thought and so i answered back with....

Quote:

Originally Posted by Mad2

Quote:

Originally Posted by GTFORDMAN

Quote:

Originally Posted by Mad2

Quote:

Originally Posted by singhlude

This brings me to my question "Can i use ignition cables meant for EF/EL on my SERIES 1 AU FAIRMONT 6 CYL"
Thanks heaps.

seeing as the EL six has a dizzy as per the EA/EB/ED you won't be able to use a set of EL ignition leads on ya AU1 as they won't fit ..... EF might fit as they are a coil pack like the AU . . but i don't know if the coil connections are the same.

AU's arent coil packs they use a coil + dizzy Ford tried coil packs in the EF but it was to troublesome so they went back to coil + dizzy for the EL then that transferred to the AU

i had a AU2 with coil pack. EA to ED were coil/dizzy, EF were coil pack but due to issues with the coil packs system they went coil/dizzy for the EL, then back to the coil pack on the AU. AU1 i believe uses the same coil pack/connector as the EF [not 100%]. then BA/BF/FG/SX/SY/SZ went a different coil pack setup again.

Quote:

Originally Posted by qwQe123456

Appreciate all your suggestions. https://stcloudfencingcompany.com/

no problem.

on fordmods - just noticed the advertising link

Citroënbender · 07-07-2022, 09:22 PM

One coil pack had male terminals, others had female terminals. That’s the distinction I remember. Foster Ute (AU2) had females as built.

**mad2** · 07-07-2022, 10:48 PM

Quote:

Originally Posted by Citroënbender

One coil pack had male terminals, others had female terminals. That’s the distinction I remember. Foster Ute (AU2) had females as built.

don't actually remember what 'Ol yella had ... but i do remember it was a coil pack most likely the same as 'Foster'.