|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
14-01-2013, 06:08 PM | #1 | ||
Starter Motor
Join Date: Mar 2005
Posts: 26
|
Hi all
I have a series one au wagon on gas. When I have a cold start the car idles rough and the Whole car shakes for around 10 seconds then idles fine. Any ideas ? Cheers Mick |
||
07-07-2013, 01:32 PM | #2 | ||
XR6T BA 2002
Join Date: Apr 2011
Posts: 682
|
having same problem on a eb 4 litre on gas
anyone keen to help us outtttttttt ????????????????????????????????????????????????? |
||
12-07-2013, 05:17 PM | #3 | ||
Regular Member
Join Date: Nov 2007
Location: Sydney
Posts: 49
|
hi,
Me three, I had exactly the same issues as mentioned above, idled rough for the first 10 seconds or so ,then ran fine, even if I started it up straight away the issue would not be there So I decided to pull the fist solenoid off (the one right near the stepper motor) and unscrewed the brass fitting (don't know what its called) and all the parts , then notice the solenoid appeared to have corrosion through the centre of it , so I changed it with a spare one Everything works fine know ,so not sure if it was the solenoid or the cleaning of the brass parts or a combination of both cheers john |
||
16-07-2013, 12:34 PM | #4 | |||
XR6T BA 2002
Join Date: Apr 2011
Posts: 682
|
Quote:
thanks john for the reply but um what solenoid am i looking for cheers |
|||
This user likes this post: |