|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-03-2012, 05:50 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,136
|
i have a 3" 60 degree bend and 2ft 3" straight. I know ill need a silicon adaptor to go into the 65mm TB, but what about the MAF? What size are they in 200kw stock form? Does it matter how far up or down the MAF goes on the pipe after the bend?
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
|
|
|
29-03-2012, 09:14 PM
|
#2 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
70mm. Keep it as close to factory position as you can. I used 3" ID silicone joiners at both ends and some hose clamps, it worked well.
__________________
2024 F150 XLT
|
||
|
|
|
|
29-03-2012, 09:17 PM
|
#3 | |||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,136
|
Quote:
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
|||
|
|
|
|
30-03-2012, 08:08 AM
|
#4 | ||
|
Stroking it...
Join Date: May 2005
Location: The 'butt
Posts: 2,844
|
More to the point, you want the MAF to be as far away from any bends as possible.. Other then that, any location is fine...
__________________
Had: 347ci AU Then:  Now: Busted assed EB Wagon - 5sp and Dual Fuel. |
||
|
|
|
making CAI - how big is stock MAF and doest it matter how far up/down it is?
Linear Mode
