|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-06-2013, 09:23 PM
|
#1 | ||
|
Sick Puppy
Join Date: Jul 2006
Posts: 1,963
|
Hi all
Seriously considering swapping my GT40P heads over to a set of Trickflows twisted wedges. http://www.summitracing.com/parts/tf...view/make/ford The GT40P currently have a set of the Yella Terra 1.7 Roller Rockers on them. Will The roller rockers swap over or will I need to buy a set of Trickflow rockers? Just trying to work out what bits Im going to be needing before I commit to it and jump in feet first. Cheers |
||
|
|
|
02-06-2013, 11:28 AM
|
#2 | ||
|
5.6L x 2 pilot
  
Join Date: Dec 2009
Location: Canbra
Posts: 15,037
 
|
From the YT website, although it does not list the Trickflow Twisted Wedges, most of the aftermarket valve spacings are at least 0.01 of an inch wider, so it will depend on the valve spacing on the Twisted Wedges.
http://www.yellaterra.com.au/downloa...entIdentity=26 If the twisted wedges have the same valve spacing as the AFRs etc, then you will need to buy longer shafts for your YT rockers. Part number for the longer shafts is YT 5048 and still available from YT. Some good information in this thread here. It is about AFRs, but a lot of the part numbers etc listed. http://www.fordforums.com.au/showthread.php?t=11268872 The last two pages have some YT detail that I discovered when doing my AFR upgrade. I believe XH5LWPN is running some Twisted Wedges on his 5.6L Windsor. He may be able to answer your question straight up. Send him a PM. Cheers Stu
__________________
2002 AU II LTD 5.6L 342ci T3 Short, AFR165 heads, Comp XE270HR-12 Cam, Brembo 4/4s(355/330), T3 5 spokes, LC-1 wideband, Whiteline HD swaybars, TCE 3K Hi Stall, PWR Auto Trans Cooler, Koni shocks, King Low Springs, Hurricane headers, 100 cpsi cats, Twin 2.5" exhaust. Quarter Mile: 13.73 @ 105.86mph Runner Up NA/DA to BF Fairlane/LTD Geelong AFD 2024  2002 XR8 pursuit 250 Custom twin 2.5" exhaust w Herrod modifed extractors, Tuned with Moates QH
|
||
|
|
|
|
02-06-2013, 12:22 PM
|
#3 | ||
|
Regular Member
Join Date: May 2009
Posts: 241
|
I notice it comes with rocker studs already installed, the person who did the work on my car previous to me buying it put a set of stud mount heads on and then machined and packed it up to fit pedastool mounts and made an absoulute mess of it, spent some money fixing them. I ended up banging a set of these in
http://www.ebay.com.au/itm/FORD-289-...item5d3faa2abb they seemed good value or if you are ordering from sumit you could probably grab a set of them to |
||
|
|
|
|
04-06-2013, 07:52 PM
|
#5 | ||
|
Regular Member
Join Date: Oct 2008
Posts: 169
|
His yt rockers wont work on the tfs heads, gt40p's are pedestal mount where as tfs are stud mount very very different mate.
__________________
AU1 XR8 btr GT40p setup 14.341@95.91mph TFS 185 heads setup 13.853@100mph Baby 60-1 t4 11.7@121mph 12psi |
||
|
|
|
|
04-06-2013, 11:16 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Mar 2006
Location: Melb, Vic
Posts: 1,088
|
With the twisted wedge heads you will need some offseted rockers to suit the design of those heads. Your convential rockers wont geometrically be correct on the tw heads. Harland sharp do offer an offseted trickflow tw head rocker set
|
||
|
|
|
|
05-06-2013, 08:24 AM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Perth NoR
Posts: 5,971
|
In short the factory Yella Terra rockers will NOT bolt onto the TFS heads.
Sell your GT40Ps & rockers together, you will also need new rockers, pushrods & rocker covers. |
||
|
|
|
| This user likes this post: |
GT40P and Trickflow Head Rocker Compatability?
Linear Mode
