|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
06-06-2013, 05:35 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2011
Posts: 90
|
Hi Guys
Cant seem to get a answer I understand out of wreckers I ask Will BA sedan, Or Ute seats bolt into my AU ute, Obviously seatbelt pretensioner and buckles may/will be different, That I can change Im not overly concerned if sedan seats will bolt in, but dont flip foward ike ute seats do, Just after some tidy and comfy updates  Also while im here, The cheaper 6 cylinder cat's/downpipes on ebay, will they be ok on LPG, any experience ? |
||
|
|
|
07-06-2013, 12:55 PM
|
#2 | |||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
Quote:
need to cut the mounting feet off, fabricate new feet and weld on. its pretty straight forward really but takes a bit of time, to measure everything up and, cut weld, grind and repaint. |
|||
|
|
|
|
07-06-2013, 04:02 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
take a look at this http://www.fordmods.com/ford-interio...n-t122443.html for some info.
|
||
|
|
|
|
08-06-2013, 04:46 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2005
Location: Melbourne
Posts: 2,035
|
Ben, did you use the drawings I gave you to mount the seat?
__________________
2015 MK7 VW GOLF GTI __________________
Previous Cars 2002 AUIII XR6 1995 EF Falcon XR6 2003 LR Focus Zetec 1989 KE Laser TX3 |
||
|
|
|
|
08-06-2013, 07:31 PM
|
#5 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 139
|
no, I didn't end up using them, thanks anyway!
the way I did it was the best way I could come up with at the time. worked out pretty well and saved me from having to shave the bolt heads. you can see the pics on the link on post #3. passenger seat fits well. doesn't touch the door or console. or hit your head on the roof. haven't done the driver seat yet, just need to drill the holes in the mounts and paint them. it looks like it will sit slightly higher than the au seats, looks like bugger all though and it may just be because thery're a bulkier sportier style of seat, ill see if my knees touch the steering wheel when I test fit it up tomorrow. |
||
|
|
|
What seats will fit into AU utes ? BA etc ?
Linear Mode
