|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| The Pub For General Automotive Related Talk |
 |
|
|
Thread Tools | Display Modes |
07-11-2024, 02:58 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2023
Posts: 1
|
Hi I recently bought a 04 xr6 ute that had a front driver's tyre blow out and somehow ripped the wiring loom out of the cabin and shredded the whole lot. So I bought a whole new wiring loom including fuse box in engine and everything lights up but engine won't kick over. Then I noticed the stereo has no power nor does the aircon or the interior lights or the windows and the original cluster gauges were stuck half way with or w/out power so I replaced that I also replaced the iss bcm and ignition all from the same vehicle and it hasn't changed anything lights are on but no1 home can any 1 please help point me in the right direction
|
||
|
|
|
07-11-2024, 04:39 PM
|
#2 | ||
|
The good, bad and fugly
 
Join Date: Feb 2016
Posts: 1,861
|
Considering that you have more than 1 item without power, one of the main fuses might have blown during the initial damage event. Check all fuses 30A and above.
Refer here. https://fordforums.com.au/wsm/wire/ba74/Wiring4.html
__________________
Time was on my side! |
||
|
|
| This user likes this post: |
|
Yesterday, 12:26 PM
|
#3 | ||
|
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,452
|
What year/model was the harness donor? It’s possible (for example) that you have installed a BF front right harness. It will fit but won’t work.
|
||
|
|
|
| This user likes this post: |
|
Yesterday, 12:36 PM
|
#4 | ||
|
FG XR6 Ute & Sedan
 Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,476
|
See https://fordforums.com.au/vbportal/v...?articleid=497 and https://www.startmycar.com/ford/falc...o/fusebox/2004 and check the Main and Battery Fusible Links.
__________________
regards Blue |
||
|
|
|
| This user likes this post: |
04 ba xr6 wiring problem/won't start
Re: 04 ba xr6 wiring problem/won't start
Linear Mode
