|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-10-2012, 02:29 PM
|
#1 | ||
|
Regular Member
Join Date: Jun 2007
Posts: 214
|
My PS pump is noisy so I have purchased a rebuilt one and will be replacing it this weekend.
I did the rack not long ago which also included the high pressure line I am pretty sure. Are there any tips or tricks I need to know when replacing the pump or is it pretty straight forward? Any special tools etc needed? Thanks, Mark |
||
|
|
|
05-10-2012, 04:04 PM
|
#2 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
Tip: ps fluid doesn't taste nice
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
05-10-2012, 04:33 PM
|
#3 | |||
|
Regular Member
Join Date: Jun 2007
Posts: 214
|
Quote:
|
|||
|
|
|
|
05-10-2012, 05:11 PM
|
#4 | ||
|
Banned
Join Date: Apr 2010
Location: NSW
Posts: 1,424
|
I guess we will just assume your talking about an AU 6 cylinder? You will find the fitting on the power steering line leaks when the new pump goes on. Need a new adaptor nut part no: BA 3F656 B..... $11.20
The old nut needs to be cut off (without damaging the line) and the new nut screwed into the pump, then the line clips in. Or you can buy a new power steering hose with a new nut attached. because you say the ps line is fairly new, you 'may' get away without doing anything, but the above advice is only if you put it back together and find it leaks. 
|
||
|
|
|
|
05-10-2012, 07:40 PM
|
#5 | ||
|
Donating Member
 Join Date: Dec 2006
Posts: 5,532
|
Cover your alternator so oil doesn't get in there
|
||
|
|
|
|
06-10-2012, 11:42 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
use the correct oil.
|
||
|
|
|
Replacing power steering pump
Linear Mode
