Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 09-10-2012, 07:36 PM   #1
tim_pato
Regular Member
 
tim_pato's Avatar
 
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
Default s1 three pin into s2 2 pin

plug in three pin plug join the 2 yellow/white wires together and then join 2 yellow wire on harness, then grey wire goes to yellow/red wire on harness. yay or ney?

tim_pato is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 07:58 PM   #2
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: s1 three pin into s2 2 pin

sorry you're not giving enough info here to give an answer what is the wiring for?
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 08:05 PM   #3
tim_pato
Regular Member
 
tim_pato's Avatar
 
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
Default Re: s1 three pin into s2 2 pin

sorry, altenator. I have a s2 ute with a 2pin altenator and the altenator light has been come on and off at random until today when it came on and stayed on. I have an s1 three pin altenator in the shed.
tim_pato is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 08:14 PM   #4
bartsau
FF.Com.Au Hardcore
 
bartsau's Avatar
 
Join Date: Nov 2008
Location: Melbourne, Vic
Posts: 1,121
Default Re: s1 three pin into s2 2 pin

Came across this issue recently when converting my 6 to an 8. The 3 pin plugs only actually use 2 wires and they are the same colours as the 2 pin plugs! To use a 3 pin alternator you will need to simply change the connector on your main loom on the car side.
__________________
AU III Forte wagon - V8, 5spd man, lowered, 18" Honeycombs, Stock diff rebuilt with TruTrac LSD, Leather Ghia interior/dash, custom twin 2.5" into single 3" exhaust.
Wagon Build

AU I Forte Sedan - No longer
Toy Car Build
bartsau is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 08:17 PM   #5
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: s1 three pin into s2 2 pin

ford actually do an adaptor for this
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 08:17 PM   #6
tim_pato
Regular Member
 
tim_pato's Avatar
 
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
Default Re: s1 three pin into s2 2 pin

thanks bartsau, i just wanted to double check before i went ahead.
tim_pato is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 08:21 PM   #7
tim_pato
Regular Member
 
tim_pato's Avatar
 
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
Default Re: s1 three pin into s2 2 pin

Quote:
Originally Posted by au3xr6
ford actually do an adaptor for this
thanks for the tip, unfortunatly im to tight to pay through the teeth for a part at ford that can be done with a pair of crimpers and 2 joiners
tim_pato is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2012, 09:04 PM   #8
tim_pato
Regular Member
 
tim_pato's Avatar
 
Join Date: Dec 2011
Location: tamworth nsw
Posts: 308
Default Re: s1 three pin into s2 2 pin

perhaps 1 for the useful au threads?
tim_pato is offline   Reply With Quote Multi-Quote with this Post
Old 12-10-2012, 10:57 AM   #9
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: s1 three pin into s2 2 pin

as far as I know they are quite cheap
Quote:
Originally Posted by tim_pato
thanks for the tip, unfortunatly im to tight to pay through the teeth for a part at ford that can be done with a pair of crimpers and 2 joiners
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 06:29 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL