|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-02-2015, 02:07 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2009
Posts: 14
|
Trying to figure out if the plugs are attached in the correct order.
I can't find a photo anywhere of the correct order. I can find references on the internet to 1-3-4-2. I tried connecting them as 1-3-4-2, but perhaps I did it wrong as engine is shaking and making a lot of odd noise. Attached if a photo of order I used, based on the sequence 1-3-4-2 |
||
|
|
|
18-02-2015, 02:30 PM
|
#2 | ||
|
Starter Motor
Join Date: Dec 2009
Posts: 14
|
wait a minute.... should 1-3-4-2 be the order of the plugs on the cap (yellow numbers)
And the plugs on the actual engine (red numbers) be 1-2-3-4 ? Is that where I went wrong? |
||
|
|
|
|
18-02-2015, 03:12 PM
|
#3 | ||
|
Banned
Join Date: Mar 2010
Location: PERTH. WA
Posts: 4,697
|
1342 on the dissy so you just need to know where number 1 is on the dissy and the rotation of the dissy to work it out from there,numbers on the motor should read 1234 left to right,should always mark numbers when removing/replacing leads.
|
||
|
|
|
|
18-02-2015, 03:25 PM
|
#4 | |||
|
Guest
Join Date: Feb 2007
Location: Gods Country
Posts: 16,258
|
Quote:
|
|||
|
|
|
|
18-02-2015, 07:37 PM
|
#5 | ||
|
Starter Motor
Join Date: Dec 2009
Posts: 14
|
never mind... found the firing order in the repair manual. Got it connected properly this time and it runs smoothly.
|
||
|
|
|
spark plug firing order for Telstar 2.0L
Linear Mode
