|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-02-2015, 02:07 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Hi guys, just wondering if it's possible to swap the 5 speed manual gearbox from a 1.3l trio and put it in a 1.5l GLi ?
|
||
|
|
|
25-02-2015, 12:35 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
hard question
needs a bit of online research or ask/phone a ford wrecker they may look the same externally and bolt on its the internal ratios that are important also ask if the clutches and flywheels /starter motor are the same
__________________
My car goes Brumm Brumm |
||
|
|
|
|
26-02-2015, 12:39 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Thanks for pointing me in the right direction mate.
Bought myself a 97 GLi manual instead, save the hassle 
|
||
|
|
|
|
03-03-2015, 07:46 AM
|
#4 | ||
|
Starter Motor
Join Date: Feb 2015
Posts: 4
|
Back with a few notes after doing some research.
Manual gearbox from 1.3L and 1.5L are not compatible (Can't even be bolted into place at same point). Manual gearbox for 1.5L come in two varieties; Tin hat and Alloy hat. |
||
|
|
|
97 WB Festiva Gearbox Change
Linear Mode
