What's in the shed?

[b2tf]

Going through the shed this afternoon and I thought I might make a list of all the spare parts I have for the AU. It got me thinking what everybody else might have lurking around the shed.

In mine I've got:

4x Tickford badges - the big ones for the engine cover
2x engine covers, 1 off current ute 1 off old ute
Set of spare rocker covers
Set of upper control arms + shim type camber kit for the S3 front end
Various aftermarket speaker spacers and grilles
Full set of XR headlights inc. looms and brackets
God knows how many headlight/taillight bulbs
S2 XR 17" rim
Tonneau support bars
FG ute catback exhaust system
XR spec bonnet
Power steering line (the one near the clutch cable)
Chrome inner door handles x2
IAT Sensor
TPS Sensor
Camshaft Synchroniser

I wouldn't mind a few more badges for the stockpile and ideally I'd like to add a complete engine to that list one day but I'll need a bigger shed for that!

[Pinkbits]

Lots!

[b2tf]

Originally Posted by Pinkbits

Lots!

You dont buy spares you buy complete bloody cars...............

[SSD-85]

My AU-specific stuff:

AU1 Classic Dash Centre
Non TC ABS module
AU1 Message Display Center
Fairmont bootlid liner
AU1 Single CD HU Black
AU1 Boot mounted CD stacker
AU2 Single CD HU
Seatbelt adjuster & lots of other bits

[Donny]

Mmmm, Id luv a spare series 2 or 3 220kw engine myself.. I wouldnt say no to a complete 250 engine either..
Im going to try to find a full S3 rebel type bodykit, and a set of front panels for spares.. A full set of non leather front and rear seats and a few other bits..

[POELWYK]

3 doors
boot lid
Fairmont bonnet
S2 XR8 Rear Wing
Fairmont boot lid carpet
full set of Stock wheels
fuel tank with Stock pump
power steering rack
S3 side skert
Bumper crossemember
Drivers side gard
S1 Upper and lower control arms (Rear Leve axal)
Wiper Arms
Wiper Motor
.... thats all i can think of off the top of my head

[mik]

i have a perfect liq silver drivers door to replace the one i damaged when i wopped a stickin out bit on the fence while opening the door ,
full gasket kit for the vct
new water pump
new drive belt
new harmonic
new disk rotors
an egas motor for a fixer upper
a standard au short motor less the head for spares
au radiator less fans a freebie with the motors
+ old replaced items , uni`s,alternator,disc rotors, heater control fascia,old hubs, old shockers, 4 sexy shadow chromes temporarily off the car
exhaust manifold off the vct
thats au specific,
there`s masses of other stuff of mostly my brothers in storage, hoping to get rid of soon........... AY LITTLE BROTHER

[SSD-85]

Originally Posted by Donny

A full set of non leather front and rear seats and a few other bits..

I forgot that I had those bits A nearly complete set of AU2/3 XR Cloth seat trims.

[gcg2503]

Not even one light bulb for the AU in mine!

[Cam]

I've got an entire AU... Minus the engine..

[RG]

Still got a bit in mine

Full set of 5.0 lifters
5.0 heater piping
347 pushrods
5.0 sump - soon to be gone....Cam
XR low beam headlight....cracked
Windsor rollmaster timing chain
Windsor standard timing chain
5.0 coil packs
5.0 set of leads
Enough bolts to hold an AU and an E series together
347 Block.....a little broken
7 1/2 5.0 pistons
8 5.0 rods
5.0 crank
AU T bar knob
AU centre console lid


I reckon I could go on for days lol




Perhaps I should get rid of some of this stuff.

I do have a plan for the block and 4 of the rods/pistons however. Might be worth a build thread when I get around to it lol.

[Donny]

Originally Posted by Scotty85

I forgot that I had those bits A nearly complete set of AU2/3 XR Cloth seat trims.

Hey mate, if your thinkin of moving it on some time sooner or later I might be interested if the stuffs cheap enough..

Im mainly thinking of keeping it for the actual trim material more than the seats themselves.. If I rip or ware out parts of mine, Id never get the replacement material/trim new..

[SSD-85]

Originally Posted by Donny

Hey mate, if your thinkin of moving it on some time sooner or later I might be interested if the stuffs cheap enough..

Im mainly thinking of keeping it for the actual trim material more than the seats themselves.. If I rip or ware out parts of mine, Id never get the replacement material/trim new..

You can actually get replacement material brand new. You just gotta know where to look ;)

I mainly kept the pieces I have for use as a template, for if I ever decide to retrim. All components that could be sewn together, are. But since I doubt ill ever need to do it again, if youre interested Donny, shoot me a PM & we'll go from there

[ronwest]

3 sets unmarked 17" rims
1 set original Ghia 16" rims (unmarked)
1 Ghia front bar
1 Brumby front bar
2 new front grill surrounds
1 set Front original door speakers + tweeters
1 original 6 cd player (working)
1 original Ghia subwoofer + amplifier
1 Ghia dash centre panel
1 Ghia steering wheel (unmarked)
1 centre console
1 bootlid
1 low series bonnet
1 set headlights
2 sealed hi-beams XR (aftermarket)
1 car-bra (XR)
**other stuff I can't think of....

[4ford]

Only last weekend I was searching thru my shed for something...and came across the complete master cylinder (all outlets plugged and with some fluid still in the reservoir) that I removed from my AU2 Fairmont6 (only 182Ks), about 3 months ago!
As it turned out, there was nothing wrong with the master cylinder, the problems were with the calipers, which were all subsequently changed out with new ones!

Anyway...I'm about to ditch it, just thought someone might want to make use of it. It's complete and probably still works fine!

Send me a private message if you're interested, gratis! if nobody calls, it will be gone by next weekend (19thNov).
As my tag says, I'm located in Burpengary, Brisbane north side.

Cheers

[au11futura]

four rc helicopters
one xss nitro savage.
all my kiss stuff
tv
mowing stuff
au brake upgrade
au tail lights
xe cluster
something bad
glass
glass cutters
glass table
mountain bike
mates genuine hdt heads

[BZINGA]

S3 xr8 200kw extractors ( ute )
S3 xr8 220 engine cover
S2 xr8 badges ( grey - sedan )
S3 xr8 badges ( grey - ute )
S2 Tickford body kit - skirts, rear bar & front pods
1 x black momo gear knob ( auto )
1 x xr6/8 black perforated leather s/wheel
1 x met blue momo s/wheel
pr tail lights
T-bar shifter & surround
cabin tidy

about it for now ..

[JC]

Set of S2 XR8 ute headers
2 x full set of AU discs - mix of AU1 and AU2
Front bar (Forte)
Rear bar (XR)
Shocks
Springs
2 x Spoilers in various states of broken-ness
5 x 7 speakers
air bag
side skirts off an AU3 SR
etc, etc

[Beer Baron]

Not much for falcons:

AU2 Auto PCM.
Auto shifter.
Auto engine/box loom
Auto tail shaft.
Auto pedal box.
Snowflakes, Not AU but still falcon.
Au 2.5 bar FPR and rail.

Late 60's and early 70's Corolla's. Well i don't know whats there but its insane amounts.

[InfernoSR]

Sorry, dont have a shed...

thats pretty bad for owning 3xAUś and 1xXG... lol!!

[KR1STO]

A lot of T-series parts..!!!!

[Whiskeyonesix]

Nothing at all in mine!

Mr Repco lives just around the corner so all is not lost

Seriously though, I've always hoarded car parts in the past - especially when I drove Land-Rovers -you kinda have to really with those.
I suspect that Her Indoors would have something to say if I started filling up the shed with automotive tat though :(

[Deaks]

ZA grill
ZB grill
ZD grill
ZD front bumper
ZD rear bumper
6x ZC/ZD headlight surrounds
4x ZD headlight buckets
4x ZD headlights
Full front end (ball joints, tie rod ends ect) for ZD Fairlane
2x ZD dash facias
Original ZD mud flaps
Interior bits and pieces
1 set of Series2 AU XR8 17" wheels
2 quiet mufflers for the XR8
42" plasma tv
3 seater couch
Bar fridge
DVD player
All my car related dvds
No wife

[b2tf]

Originally Posted by b2tf

4x Tickford badges - the big ones for the engine cover
2x engine covers, 1 off current ute 1 off old ute
Set of spare rocker covers
Set of upper control arms + shim type camber kit for the S3 front end
Various aftermarket speaker spacers and grilles
Full set of XR headlights inc. looms and brackets
God knows how many headlight/taillight bulbs
S2 XR 17" rim
Tonneau support bars
FG ute catback exhaust system
XR spec bonnet
Power steering line (the one near the clutch cable)
Chrome inner door handles x2
IAT Sensor
TPS Sensor
Camshaft Synchroniser

Add to that:
2x NOS Tickford badges for quarters
Brand new unmarked Tickford options plate
'Synergy 5000' manifold plate
5L V8 manifold plate
Another MOMO 5spd knob
Full set of NOS XR cloth seat trims still in original packaging.

Buying up big before it all runs out.

[XRGhia]

AU A/C compressor (and somewhere the lines)
AU P/S Pump
EF/EL Timing case
EF/EL/AU Harmonic Balancer
EF A/C compressor
EF/EL Alt
EF/EL/AU Waterpump
EF/EL/AU Tensioner
EF/EL/AU (non VCT) belt cover
AU Thermostat housing
EF Ded. LPG Intake Manifold
AU XR6 intake manifold
3 airboxes
2 intake pipes from upper airbox to the throttlebody
AU throttlebody
EF throttlebody
2 EF/EL front seats
2 rear EF/EL doors
7 door trims from EF/EL
LPG wagon tank
Steering column and rack
Full EF/EL/AU1 front brake setup
5 or 6 E-series offset EF Fairmont alloys
Fuel tank (EF/EL, maybe AU)
Bodykit to suit EF/EL
AU console lid
EF/EL/AU airbag
EF/EL/AU steering wheel (grey)
AU non-xr front bar (damaged, I think it went last week)
AU Wagon rear boot lining
Two power antenna's (one from AU, one from EF)
Standard EF/EL/AU Live axle exhaust (rusted out mufflers)
Standard EF/EL/AU cat convertor
EF/EL/AU headers
EF engine
EF/EL carpet
EF wiring looms
EF/EL and (possibly AU live axle'd) wagon and sedan driveshafts
EB wagon back seats
Heaps of random E-series and AU interior bits like handles, lights
E-series wagon rear bar + EF headlights (GLi and Fairmont)


.... and that's just off the top of my head for the parts in the garage....

edit: bloody hell, a clean up is needed... i'll throw up a for sale thread soon for anyone interested in any parts...

[dylby1]

Not heaps
1 x au ute tail gate
1 x au ute rear bumper
Aftermarket eb Gt rear bar
Eb fairmont rear bar
Ea-ed sports exhaust (cat to axle, no tail section)
Stock ba rear muffler.

Probably other crap too lol

[b2tf]

Originally Posted by dylby1

Not heaps
1 x au ute tail gate
1 x au ute rear bumper

Send me a PM if you want to sell those and get them out of the way!

[fat4D]

Originally Posted by Deaks

No wife

Thats gold! Sometimes its not what you have its what you Dont lol

[Reaper8]

got lots of spiders not much spare parts

[dylby1]

Originally Posted by b2tf

Send me a PM if you want to sell those and get them out of the way!

Haha nah they're for my brothers ute, just need to paint them lol