|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
19-11-2005, 01:54 PM
|
#1 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 150
|
Help Pleeeaase!!
I am trying to install xr coils onto my forte series 1. Did the rears last night with no problems. I am currently stuck on the front. No matter how hard I try I cannot loosen the lower nut and bolt of the front shockers. Any suggestions or ideas would be greatly appreciated. |
||
|
|
|
19-11-2005, 02:21 PM
|
#2 | |||
|
Regular Member
Join Date: Sep 2005
Location: Melbourne
Posts: 125
|
Quote:
I used a socket on the bolt to hold it steady and a socket on the nut with a 1/2in ratchet and a piece of pipe on the end of the ratchet handle for leverage. Failing that a rattle gun  :
__________________
2006 BF Egas XR6 Ute. Bone stock - Sorry Fellas I've had a set of King Springs in the garage for 12 months who knows when I'll get around to putting them on  :
|
|||
|
|
|
|
19-11-2005, 05:26 PM
|
#3 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 150
|
Got it off finally. All coils now on, car looks great. I'm very relieved!!
|
||
|
|
|
|
19-11-2005, 06:45 PM
|
#4 | |||
|
Regular Member
Join Date: Sep 2005
Location: Melbourne
Posts: 125
|
Quote:
Good Stuff :1syellow1
__________________
2006 BF Egas XR6 Ute. Bone stock - Sorry Fellas I've had a set of King Springs in the garage for 12 months who knows when I'll get around to putting them on :
|
|||
|
|
|
|
19-11-2005, 07:16 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2005
Posts: 1,861
|
how does it handle? With some XR swaybars it should sit nice and flat compared to the forte suspension!
|
||
|
|
|
|
19-11-2005, 07:57 PM
|
#6 | ||
|
Regular Member
Join Date: Aug 2005
Posts: 150
|
Hav'nt driven it yet. Need to do the final tighten up of all nuts and bolts. Ran out of time today as the Missus had something else happening. Will go for a drive tomorrow.
Did'nt consider xr sway bars though I will now!! |
||
|
|
|
Front Shocks Lower Mount Bolt Stuck
Linear Mode
