|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Drag Racing Discuss Drag Racing here be it dirt or tarmac. Sponsored by Sydney Dragway. |
|
Thread Tools | Display Modes |
23-02-2012, 09:40 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Feb 2006
Posts: 1,135
|
I use a FMX but have been offered to try out a transbrake equipped c4 to see if I like it. The question is what drop in 60' times and 1/4 mile ET have you seen using a trans brake compared to a normal stalled up launch.
|
||
24-02-2012, 07:25 AM | #2 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Location: TAS
Posts: 2,551
|
it all depends on grip, tyres used, stall speed, power, brakes, etc etc. A street car with close to stock power will not make much difference. In a high horsepower drag car with slicks and littlies up front will drop a second or two off the time.
For example - a street car on street tyres will just blow the tyres off with a trans brake, so making it slower or exactly the same. My xa coupe can't hold the power and the grip from the rear tyres without the trans brake, so i drop over half a second using one. So give us some more details of what you want to run it in and we help give you and idea of the difference
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car BA GT-P for the shed Mustang GT for the other half E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it. BA XR6T for a daily NT Pajero for the bush XB 4 door project- swallows a BF xr6 turbo My dad is a generous bloke. He gave away his dead car batteries free of charge.... Last edited by GTP owner; 24-02-2012 at 07:30 AM. |
||
24-02-2012, 09:59 AM | #3 | ||
Banned
Join Date: Mar 2010
Location: Prasac-ville
Posts: 6,976
|
you'd pick up a couple tenths ET for sure.
as GTP Owner said more details would help. |
||
24-02-2012, 11:49 AM | #4 | ||
Regular Member
Join Date: Aug 2005
Location: PERTH
Posts: 467
|
Basically, if your car is setup to run the 1/4 mile and you already have the correct converter it won't change your times!!!! It is basically for consistancy as you leave at the exact same rpm's every single pass! If you're changing from fmx to c4 you will see some change one way or the other. I used a c4 for quite a while with no brake then went to it and picked up hundredths.
__________________
383 Clevo, CHI 3V's, solid roller, Glide. 7.97@164.83 mph. |
||
24-02-2012, 04:38 PM | #5 | |||
FF.Com.Au Hardcore
Join Date: Sep 2006
Location: TAS
Posts: 2,551
|
Quote:
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car BA GT-P for the shed Mustang GT for the other half E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it. BA XR6T for a daily NT Pajero for the bush XB 4 door project- swallows a BF xr6 turbo My dad is a generous bloke. He gave away his dead car batteries free of charge.... |
|||
01-03-2012, 09:24 AM | #6 | ||
Regular Member
Join Date: Mar 2009
Location: Adelaide hills
Posts: 271
|
I use a trans brake and absolutelly love it. Just makes it so easy to get revs right and test with alot more certainty of what changes you are making.
Im running a 1.5 60 foot highly recomend transbrake
__________________
|
||
01-03-2012, 10:21 AM | #7 | ||
Patience is a virtue
Join Date: Feb 2006
Location: Mount Gambier
Posts: 1,173
|
Best 60 without it is 1.42 and 1.38 off the brake and a 2 step. You really need the 2step with a transbrake to get the consistancy out of it.
__________________
417ci CHI headed XD. Dynamic transmissions C4 Track times 60ft pb 1.365 (24-3-12) 10.173 @ 134.97mph 1/4 6.324 @ 108.93mph 1/8th PB SOLD |
||
01-03-2012, 11:37 AM | #8 | ||
Regular Member
Join Date: Mar 2009
Location: Adelaide hills
Posts: 271
|
Agreed Also Using 2 Stage
__________________
|
||
01-03-2012, 12:39 PM | #9 | ||
Tribal Elder
Join Date: Jul 2005
Location: Yarrambat
Posts: 2,278
|
Whats involved in setting up?
|
||
01-03-2012, 07:05 PM | #10 | ||
FF.Com.Au Hardcore
Join Date: Sep 2006
Location: TAS
Posts: 2,551
|
its a kit that needs the trans to be pulled apart and rebuilt with the solenoid built in. They are specific to the trans you have (ie you can't use a generic kit). The major speed suppliers have them
__________________
XA coupe 8.8sec @ 150mph http://www.fordforums.com.au/showthr...coupe+drag+car BA GT-P for the shed Mustang GT for the other half E3 chubsport - fully fat (and slow), sitting there waiting for me to get sick of it and sell it. BA XR6T for a daily NT Pajero for the bush XB 4 door project- swallows a BF xr6 turbo My dad is a generous bloke. He gave away his dead car batteries free of charge.... |
||
01-03-2012, 11:21 PM | #11 | ||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
EB 6 on Boost with forged turbo motor just kills the C4 ''
10.5 X 28 slicks... Going Powerglide, aftermarket case etc.. He was holding fairly high rpm and boost.. Two rebuilds in short time he gave it away.. 550+ RWKW with decent torque kills them.. Dominello wouldn't fit a trans brake on Jamie's Fairmont due to strength issues.. Should be o/k on lighter car such as Cortina..
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
||
03-03-2012, 02:16 PM | #12 | ||
1000+ passes
Join Date: Dec 2007
Location: Mid Nth NSW
Posts: 343
|
I tried a trans brake in my high 9 second capri in the 90s it didn't have tubs and was on the limit of traction, I found it was slower since I couldn't load up the suspension and the weight transfer wasn't as good as holding it on brakes and making the noise dip down, It hit pretty hard make sure you have good axles, I'm sure with heaps of traction it would be great,
__________________
XY ute 1600+ kgs, normally aspirated pump gas 351 std stroke, cast iron 2V heads, toploader, drag radials, 11.524 - 119.48mph https://www.facebook.com/DragRacingT...2067110055900/ http://www.cacklingpipes.com/100825_...250810_025.JPG XA coupe naturally, aspirated Cleveland, full exhaust, 98 oct pump gas, drag radials, Manual trans, 10.664 132 mph The faster youve gone the worse your attitude |
||
03-03-2012, 05:03 PM | #13 | ||
Donating Member
Join Date: Aug 2006
Posts: 5,142
|
Are Transbrakes allowed on public roads...? Sorry, just curious.
|
||
03-03-2012, 06:27 PM | #14 | |||
Starter Motor
Join Date: Jun 2005
Posts: 21
|
Quote:
yes, they dont engage unless you activate with a push button on the wheel or shifter. |
|||
03-03-2012, 09:56 PM | #15 | |||
Banned
Join Date: Mar 2010
Location: Prasac-ville
Posts: 6,976
|
Quote:
|
|||