Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 29-03-2012, 06:49 AM   #1
Lajon
Regular Member
 
Join Date: Oct 2009
Posts: 131
Default cat converter

G'day all, I'm pretty sure that my cat converter is stuffed...has anyone had any experience in fixing these? also if i need to replace it what is the cheapest i should pay for one? i have a series 1 4litre lane

Lajon is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 08:07 AM   #2
aufalco
Alternator
 
Join Date: Jan 2011
Location: Wide Bay QLD
Posts: 251
Default Re: cat converter

if your cat is stuffed then your exhaust will start to get a rotten egg like smell coming from it, especially if you put your foot down and heat up the exhaust, standards cats are easily replaced and will bolt straight in and from what ive seen around hi flow cats will need to be welded in for the AU

if i were you and your cat is stuffed i would replace with a hi flow as a standard cat from ford (part only) will probably cost about as much as getting a hi flow cat fitted
aufalco is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 08:18 AM   #3
AU Mont
Banned
 
Join Date: Apr 2010
Location: NSW
Posts: 1,424
Default Re: cat converter

go on ebay, and get the cheapest magnaflow in the correct pipe size sent here from the U.S. for under $100 delivered
AU Mont is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 10:19 AM   #4
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: cat converter

the cat can't be fixed and doesn't always smell when stuffed it may rattle and you may notice a slight or significant power loss with an increase in fuel consumption

A high flow is often cheaper to buy but needs to be welded in , if you have a standard exhaust ( and don't intend on changing it) a standard cat is a straight bolt in item making it an easy DIY job
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 01:03 PM   #5
Day-mow
rexnet
 
Day-mow's Avatar
 
Join Date: Feb 2010
Location: Adelaide, South Australia
Posts: 3,562
Default Re: cat converter

Could bash it out. Or buy a kenobi cat like I did..... For now.
__________________
MY06 WRX Build Not Bought
Collingrove Hill Climb- 38.79

Remember it is the internet,So beware of trolls, If you argue with trolls the kids will laugh at you

Follow me on twitter @ Day_mow
Day-mow is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 02:50 PM   #6
my67xr
FF.Com.Au Hardcore
 
my67xr's Avatar
 
Join Date: Aug 2007
Location: Brighton, Adelaide
Posts: 3,972
Technical Contributor: For members who share their technical expertise. - Issue reason: This contribution: 04 SX TX AWD, drama's replacing upper outer joints w/Nolathane replacements 
Default Re: cat converter

my EL one started to rattle, then bits of honeycomb started to come out the tailpipe tip, the rattle then stopped.
i removed the cat from the bottom of the exhaust manifold and from where it joined the exhaust/muffler by unbolting it.
it was a straight though cat now, or a de-cat system.
i bought another one secondhand.

on ebay there are a few around $140 for standard - $170 for high flow designs
i have fitted a few cars with the magnaflow 2.25", them seem pretty good for the price.

http://www.ebay.com.au/sch/i.html?_f...All-Categories
__________________
Money Talks, but all i ever hear is it saying Goodbye!!

click below to view my build threads
67 XR Fairmont
04 SX TX Territory AWD

my67xr is offline   Reply With Quote Multi-Quote with this Post
Old 29-03-2012, 03:39 PM   #7
Mr Hardware
Flairs - Truckers Delight
 
Mr Hardware's Avatar
 
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
Tech Writer: Recognition for the technical writers of AFF - Issue reason: The excellent how to on LPG jet cleaning. 
Default Re: cat converter

must..resist...posting..a..broom
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon"
Mr Hardware is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL