|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-09-2011, 08:56 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
Hey Hey,
AU2 Sr sedan 5 speed manual running Xr6 fuel pressure reg, Xr6 HP Ecu. Without the accelerator it wont start, slight accelerator it starts fine. Was worse before i fitted the xr6 FPR. Hot starts like it should. I've plugged it into IDS and no codes have been logged. Temp sensor is fine Oxy sensor is fine Knock sensor is fine Edis sensor is fine All sensors read fine. New leads, coil, plugs, All filters, All oils. Pump primes properly with correct pressure. No gasket leaks. Doesn't use any fluids. Idea's ? myself and ford are lost. Can post a video tomorrow night.
__________________
AU XLS. |
||
|
|
|
05-09-2011, 09:40 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
dunno mate, just wondering if you bump the idle up a tiny bit...... 100 rpm does that make the difference?
|
||
|
|
|
|
05-09-2011, 09:48 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
does it run much differently when hot? how much does the idle change speed when hot?
|
||
|
|
|
|
06-09-2011, 01:26 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
Once it's started it runs fine.
__________________
AU XLS. |
||
|
|
|
|
06-09-2011, 02:13 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 580
|
inspect the throttle body IMO. wiring dirtyness, im more of a carby oldschool person cant really help much this modern efi engines...a friends rodeo had the exact same symptoms though, and that turned out to be a blown fuse for something. thats all i can really remember though.
|
||
|
|
|
|
06-09-2011, 04:40 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
I've cleaned the idle speed controller and the throttle body. All plugs are connected and secure, Fuses are also fine.
Its just not getting enough fuel for cold starting but i don't understand why not.
__________________
AU XLS. |
||
|
|
|
|
25-09-2011, 08:30 PM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2009
Location: Brisbane, Qld
Posts: 683
|
The PCM is sending mixed signals for cold starting. Fitting a known good PCM during the week to see what happens.
__________________
AU XLS. |
||
|
|
|
|
25-09-2011, 09:10 PM
|
#8 | ||
|
Stay Classy ™
Join Date: Apr 2005
Location: Sydney
Posts: 2,044
|
Have you checked the sock on the fuel pump to see if that is clogged?
|
||
|
|
|
|
26-09-2011, 12:05 PM
|
#9 | ||
|
Regular Member
Join Date: Oct 2008
Location: Burpengary, Q
Posts: 112
|
Also, just a thought, you might try:
1/ when cold, before you try to start, select the ignition key to ON position and wait about 5 seconds... 2/ then try to start... Cheers |
||
|
|
|
Hard starting when cold.
Re: Hard starting when cold.
Linear Mode
