|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-05-2021, 11:23 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: May 2013
Posts: 539
|
Guys,
I can open my passenger door from the outside but not from the inside. Any ideas what is causing the problem. Cheers |
||
|
|
|
11-05-2021, 11:30 PM
|
#2 | ||
|
Kicking back
Join Date: Dec 2013
Location: Western sydney
Posts: 8,675
|
Check the cable linkage from the inside that runs down to the latch mechanism. So that requires the door card off, but thats not difficult.
|
||
|
|
|
|
11-05-2021, 11:42 PM
|
#3 | ||
|
Kicking back
Join Date: Dec 2013
Location: Western sydney
Posts: 8,675
|
The metal rod is what goes to the external handle, the cable is what connects to the internal handle, if that helps. So it could be busted plastic bits on either sides, or if its the rear door, check if the child lock is on. Ive only repaired an au ute, so no rear doors.
|
||
|
|
|
| This user likes this post: |
AU Passenger Door
Linear Mode
