New ICC Facia, screen & reverse camera

[wils7374]

Hi Fadi,
I have recently upgraded my SY TX to dual zone a/c with colour screen with parts from FTG, then added a reverse camera.

Unfortunately screen not in best condition (scatched & has some sort of "watermark" in bottom third) and facia colour doesn't match the TX's.

Can you please advise cost to repair/replace screen, supply facia to suit TX (if available) and also some info on the reverse camera you supply, the unit I got from eBay, although functional, not the best quality and due to the lenght of it made install little untidy.

Thanks, Wils.

[FADI75]

Originally Posted by wils7374

Hi Fadi,
I have recently upgraded my SY TX to dual zone a/c with colour screen with parts from FTG, then added a reverse camera.

Unfortunately screen not in best condition (scatched & has some sort of "watermark" in bottom third) and facia colour doesn't match the TX's.

Can you please advise cost to repair/replace screen, supply facia to suit TX (if available) and also some info on the reverse camera you supply, the unit I got from eBay, although functional, not the best quality and due to the lenght of it made install little untidy.

Thanks, Wils.

wils

new screen $640.00
second hand screen $350.00
facia $100.00

reverse camera kit complete factory look under the grab handle $585.00.

cheers

fadi75

[wils7374]

Fadi,

Is there anything wrong with the second hand sceen, i.e. scratched, dead pixels etc?

Just chasing info/price on camera itself, I already have a kit and a cheap IR camera installed in factory handle but would consider other if able to provide equal or better vision and better mountability (current camera protudes a little to far).

Cheers,

Wils

[FADI75]

Originally Posted by wils7374

Fadi,

Is there anything wrong with the second hand sceen, i.e. scratched, dead pixels etc?

Just chasing info/price on camera itself, I already have a kit and a cheap IR camera installed in factory handle but would consider other if able to provide equal or better vision and better mountability (current camera protudes a little to far).

Cheers,

Wils

wils

they might have minor scratches not too visible, however we can get some out scratches free.

the camera it self with grab handle for territory is $250.00, they good quality we had some feed back saying better then factory ones.

cheers

fadi75

[wils7374]

Fadi,
If you can find a second hand screen without scratches & facia to suit my TX please send PM.

Thanks,
Wils.

[FADI75]

Originally Posted by wils7374

Fadi,
If you can find a second hand screen without scratches & facia to suit my TX please send PM.

Thanks,
Wils.

wils

pm sent

cheers

fadi75