Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 29-05-2005, 11:50 PM   #1
bounceferret
Starter Motor
 
Join Date: May 2005
Posts: 8
Default BIG power steering issues

I think i might be up for a new power steering pump??

I was driving a mate home tonight from work, unfortunatly this entitled a 360 turn with fair bit of the old accelerator. After the "turn" was completed, which is must say i was impressed with, the power steering pump was making a terrible whining noise when turning the wheel either way. I decided to take the car for a bit of a drive to see if it would nut itself out. Around some of the sharper corners to steering wheel started to vibrate. The steering also got a hell of a lot heavier. After about 10 mins of driving the steering started improving, but it never returned to it's original state.

There are 2 things i can think of
1. the power steering fluid was low to start with, doing the donut (somehow ??) forced all remaining fluid into the system leaving none in the pump??

2. I've rooted the pump by doing something stupid?? if so how much for a pump from the wreckers???

What do you guys think???
any help???


Cheers!
bounceferret is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2005, 01:36 PM   #2
Timeshift
Regular Member
 
Join Date: May 2005
Posts: 83
Default

Well fill the fluid up to where it should be and see if it continues to happen.
Timeshift is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2005, 09:50 PM   #3
bounceferret
Starter Motor
 
Join Date: May 2005
Posts: 8
Default

filled the fluid, still a bit shitty
bounceferret is offline   Reply With Quote Multi-Quote with this Post
Old 30-05-2005, 09:59 PM   #4
Steve_T
Regular Member
 
Join Date: Jan 2005
Posts: 339
Default

Fluid may have got airated/aerated/ - got some air in it Would be worth trying an air-evac. procedure on the system. If you have a vacuum pump (or access to one) I can tell ya how.

Steve.
Steve_T is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 11:20 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL