|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-10-2013, 01:36 PM
|
#1 | ||
|
CNC fixer guy
Join Date: Sep 2006
Location: Melbourne Vic
Posts: 609
|
Hi guys,
Considering the minority of au's with irs and the lack of knowledge or even it's existence, would it be a good idea to have a thread or sticky just for this case entailing info, problems and solutions for au irs? What do you think? |
||
|
|
|
04-11-2013, 04:42 PM
|
#2 | ||
|
CNC fixer guy
Join Date: Sep 2006
Location: Melbourne Vic
Posts: 609
|
Ok so i take it its not a good idea then.
The other issue i have is the rear end skipping sideways a little over small bumps or joins in the road etc. |
||
|
|
|
|
04-11-2013, 05:03 PM
|
#3 | ||
|
Lacking Imagination
Join Date: Jul 2006
Location: In The Global Collective
Posts: 3,909
|
I have the same,
My Steering joint told me to check my swaybar links as they looked worn!
__________________
My 11 Second AU Fairlane 364w | 225cc CNC | ---/---@0.050 | Morrison Motorsport ITB Manifold | MoTeC M150 (Engine Control) | PCS TCM-2800 (Trans Control) | 6800rpm Stall | 4R75W |
||
|
|
|
|
04-11-2013, 07:36 PM
|
#4 | ||
|
When in doubt, GAS IT!!
Join Date: Sep 2006
Location: Lower Eyre Peninsula, SA
Posts: 3,018
|
Check your upper control arm outer spherical joints, that's what was cactus on mine when it did that.
__________________
. HERS- BFIII Wagon Gold, alloys, dual fuel, bullbar, big tow pack, trans cooler, fully rebuilt HD suspension, Clarion, alarmed, full 2 1/2" sports system, mint body MINE- AUII Forte Meteorite, dual fuel but otherwise bog stock. MINE- AUII Fairlane Sportsman Liquid Silver over meteorite,HIDs', Airhog, Eagle Leads, dual fuel, custom rear springs, BA slotted discs + a second one for spares . |
||
|
|
|
|
04-11-2013, 09:25 PM
|
#5 | ||
|
CNC fixer guy
Join Date: Sep 2006
Location: Melbourne Vic
Posts: 609
|
Hi basher. All my outer sphericals are new and the inners seem to pass the crow bar test.
Will get a 4 wheel alignment soon and see if it helps could also be rear struts a tad worn. Upper strut mounts have been modified to fix the usual problem there. Cheers. |
||
|
|
|
| This user likes this post: |
Seperate thread / sticky for au IRS info or issues?
Re: Seperate thread / sticky for au IRS info or issues?
Linear Mode
