Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 10-06-2008, 05:25 PM   #1
lismoron
Starter Motor
 
Join Date: Jun 2008
Posts: 2
Question 91 Laser won't start -no spark!

Hi there, this is my 1st post on this forum: My 1991 Laser won't start. There's plenty of fuel. It's stopped the day before but we got it going again somehow. It only stopped when idling. Now it's stopped for good. There's no spark. Could it be the coil? Where there's normally a condensor there's a black chip. Any ideas? thanx

lismoron is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2008, 05:27 PM   #2
galaxy xr8
Giddy up.
 
galaxy xr8's Avatar
 
Join Date: Dec 2004
Location: Kramerica Industries.
Posts: 15,637
Default

Try the module on the electronic ignition.
galaxy xr8 is offline   Reply With Quote Multi-Quote with this Post
Old 10-06-2008, 05:27 PM   #3
lismoron
Starter Motor
 
Join Date: Jun 2008
Posts: 2
Default

Sorry, I'm not so good with mechanics - what's the "module"? Is that the little black chip on the side of the distributor?

Last edited by lismoron; 10-06-2008 at 05:30 PM. Reason: mistake
lismoron is offline   Reply With Quote Multi-Quote with this Post
Old 11-06-2008, 06:34 AM   #4
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

welcome to the forums

the black chip outside of the dissy is called an exciter

the module is inside the dissy below the rotor

shop around for the replacements from an auto electrician or pay ford price $$$
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 07:16 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL