Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 09-10-2013, 02:46 PM   #1
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default Wiring Harness Open Circuit???

Hi all.

Just hooked my xr up too an elm327 scantool using forscan.

It popped up with one DTC.

RCM - B1877

Code; B1877 - Safetybelt Driver Retractor Circuit Failure

Module; Restraint Control Module

Details; Wiring Harness Open Circuit.


So my question is, what does this mean? And how do I fix it?

Also noticed my IAT is reading -15C, think its buggered too lol

Cheers,
James

__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2013, 05:13 PM   #2
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: Wiring Harness Open Circuit???

it's a seatbelt pre tensioner fault. I had the same but it was just the plug on mine
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2013, 08:50 AM   #3
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default Re: Wiring Harness Open Circuit???

So If i pull the bottom half of the pillar where the seltbelt goes, I should find the tensioner down there somewhere
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2013, 09:02 AM   #4
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: Wiring Harness Open Circuit???

no, the pretensioner is in the part attached to the seat it is part od the buckle . the connection is under the seat
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2013, 09:57 AM   #5
james22
With da Warlords
 
james22's Avatar
 
Join Date: May 2006
Location: Orange NSW
Posts: 1,781
Default Re: Wiring Harness Open Circuit???

Ahhh, cheers for that. Definitely plugged in, so I'll have to check it out
__________________
You don't have to be faster than the bear, you just have to be faster than the slowest guy running from the bear.

For Sale: Parachute. Only used once, never opened, small stain.

Windsor Warlords
AU III XR-8220
300+ rwhp of Manual fun

XR50T Ute - 300rwkw (give or take depending on the day)
james22 is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2013, 11:03 AM   #6
FGII-XR6
FF.Com.Au Hardcore
 
FGII-XR6's Avatar
 
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
Default Re: Wiring Harness Open Circuit???

one might be faulty, if you can get hold of a spare set for testing try swapping them over
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty.

"It is better to remain silent and be thought a fool than to speak out and remove all doubt."

Start a new career as a bus driver

Rides:
FG2 XR6 stock at this stage but a very nice ride

xc 4 DOOR X CHASER 5.8 UNDER RESTO
FGII-XR6 is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 01:14 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL