|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-07-2012, 07:48 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2007
Posts: 994
|
Hi Guys what diff ratio would a stock 2000 au2 auto sedan be and can the diff be locked like the old ones with a welder (race car) or do you need to buy the mini spool.
Cheers |
||
|
|
|
01-07-2012, 11:37 PM
|
#2 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
au 2 like a fairmont xr8 a straight 6?
|
||
|
|
|
|
02-07-2012, 06:49 AM
|
#3 | |||
|
FF.Com.Au Hardcore
Join Date: Oct 2007
Posts: 994
|
Quote:
|
|||
|
|
|
|
02-07-2012, 11:01 AM
|
#4 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
If its a standard six chances are its a single spinner 3.23 however if you like to double check get your head under the rear and look on the axle on the drivers side you should find a white sticker with the ratio on it and if there's no tag on the diff refill bolt it's probably single spinner
|
||
|
|
|
|
02-07-2012, 12:58 PM
|
#5 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2007
Posts: 994
|
Cheers, was anything from that model fitted with say a 3.7 or there abouts, or earlier, Ill just use some hub adaptors as i am now on the EB. the 4.11s are too much for the tracks im running on. Next car being the Au i just pilfered the motor out of for the EB was wondering/ hoping i didnt have to change the diff, ahh well its not supposed to be easy!
|
||
|
|
|
|
02-07-2012, 02:57 PM
|
#6 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
nope highest they went to from factory was lsd 3.45gears however i have a lsd and 3.45 diff gears here for sale also have a set of 4.11 diff gears that would fit your diff
|
||
|
|
|
|
02-07-2012, 06:22 PM
|
#7 | |||
|
Donating Member
 
Join Date: May 2008
Posts: 12,680
|
Quote:
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
|
|
|
|
02-07-2012, 09:05 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2007
Posts: 994
|
cheers guys, already have a 4.11 locked diff, will need to chase up a 3.73 gear set and mini spool then. Thanks
|
||
|
|
|
|
02-07-2012, 09:16 PM
|
#9 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2006
Location: Salamander Bay
Posts: 5,427
|
forte, futura 3.08
fairmont fairlane, LTD 2.32 XR and ute 3.45
__________________
[SIGPIC][/SIGPIC]
Everyone starts off with a bag full of luck and an empty bag of experience. The trick is to fill the experience bag before the luck bag is empty. "It is better to remain silent and be thought a fool than to speak out and remove all doubt." Start a new career as a bus driver Rides: FG2 XR6 stock at this stage but a very nice ride xc 4 DOOR X CHASER 5.8 UNDER RESTO |
||
|
|
|
|
03-07-2012, 12:09 AM
|
#10 | ||
|
Banned
Join Date: Dec 2007
Posts: 3,290
|
my fairmont came standard with ss 3.23
|
||
|
|
|
Cig locker and diff ratio?
Linear Mode
