|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
02-09-2009, 05:22 PM | #1 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
I don't know much about these zephyr zodiac consul cars.
What was the go with these. I think in the 1959 zephyr MK II, you could option disk brakes and a 3 speed auto. I remember my mum nearly bought a zephyr. one of the last Aussie made type. i think it had a 155 ci motor. my brother's mate had one, and it performed well. Does anyone know the history of these cars. only mainly about the ones we got in Australia. Were they a better car then the Holden's in them days. how! Was ford the 1st to have a automatic transmissions in aus. I know the XK falcon got a 2 speed auto in 1960. But was it a zephyr or a customline or a galaxie that we Aussies first got an automatic transmission car. or was GM the 1st. |
||
02-09-2009, 05:58 PM | #2 | ||
Peter Car
Join Date: Dec 2004
Location: geelong
Posts: 23,145
|
The straight sixes were SOHC I think and apparently went quite well in the day. Way better than the Holdens did.
|
||
02-09-2009, 06:00 PM | #3 | ||
V8 Powaah
Join Date: Jan 2005
Location: Sunshine Coast, QLD
Posts: 1,994
|
English car, was at one stage going to be made fully here instead of the Falcon. Was pretty exxy even in the days of the old Imperial Tariff preference.
Zephyr was a big 4 Zodiac was a small I6 There was also a ute Australia got the Mark 1, 2 & I believer the 3's, 4 was a Europe only job that got replaced by the Tannus/Granada Pretty sure Customline had Auto in Australia before the Zephyr, first Auto in Australia though was probably a Buick
__________________
FG G6E Turbo- Seduce & Cashmere - Sold XF S pack Sedan- AU 302 Windsor, T5, 2.77 LSD, Many Mods
|
||
02-09-2009, 06:42 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Gisborne Victoria
Posts: 2,662
|
A lot of incorrect posts here.
Mk1 & 2, Consul is four cylinder, Zephyr and Zodiac is six cylinder. Mk 3 you get the Zephyr 4, Zephyr 6 and Zodiac. All of he above inline engines and no OHC. All available in Australia. Mk 4 Zephyr 4 is a 2 litre V4 Essex. Zephyr 6 had a 2.5 or 3 litre Essex and Zodiac all had 3 litre V6s, same as the Capri mk 1. Mk 4 not available in Aus but sold in NZ and Africa. All replaced by the Mk1 Granada series in 1973. |
||
02-09-2009, 07:57 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 514
|
Zephyr had a McPherson Strut front end.
Way faster than a comparable Holden. My first car was a new FC ute. It did 85mph flat out. I got a repco 'supersport' exchange engine and it was timed at 96 mph. I got a Zephyr Ute in 1961 and it did 97mph standard! Mk2 Zodiac claimed an extra 10hp than Zephyr. The consuls had a slightly shorter front and 4cylinders only. The Zodiac was kinda like the Fairmont Ghia of the Zephyr It was quicker, better handling, braking than the first few falcons. It had a nice short throw manual that was miles ahead of the falcons' big long throw shifter. Disc brakes were offered on the last of the Mk2's. The Mark 3 was a beauty. Look back at old footage of armstrong 500's and you'll usually see a mk 3 on the front row or two. |
||
02-09-2009, 08:28 PM | #6 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,482
|
Hi check http://www.freewebs.com/zzocm/index.htm for the melbourne club cheers md
|
||
02-09-2009, 08:32 PM | #7 | ||
FG XR6T trayback
Join Date: Jan 2007
Location: N-W NSW
Posts: 1,311
|
Mk3 and Mk4 had 4-speed boxes too, on the column though.
|
||
02-09-2009, 10:39 PM | #8 | ||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
Here is the Mk 2 and Mk3 Zephyrs on Beach hop N.Z..
The Mk2 is my brothers car... This mk3 has a V8 conversion.. The Mk 4's had four wheel disc brakes and IRS rear suspension.. All Zephyrs are 6 cylinders .. The Consul was the 4.. The V4 didn't make it to N.Z thank goodness.. Though it did come in the Transit and 2Ltr Capri.. Bottom is the Zodiac Mk4...Same engine as the 3Ltr Capri .. This engine had the combustion chambers in piston like the 1600 Kent engine.. Could suffer from over heating if laboured ..
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 Last edited by ebxr8240; 02-09-2009 at 10:49 PM. |
||
This user likes this post: |
02-09-2009, 10:54 PM | #9 | |||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Gisborne Victoria
Posts: 2,662
|
Quote:
|
|||
03-09-2009, 02:06 PM | #10 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
I have found they have a borg warner DG auto from 1961 so what is that a 3 speed auto or 2 speed.
ehast13 them zephyr ute's look good to. must of been rare as hens teeth. |
||
03-09-2009, 05:56 PM | #11 | ||
Regular Member
Join Date: Apr 2005
Posts: 67
|
A few more sites with plenty of info
http://www.galeforcezephyrs.com/ http://fordczzmkll.webs.com/ http://autos.groups.yahoo.com/group/...rzodiacconsul/ |
||
03-09-2009, 06:05 PM | #12 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 514
|
Dunno, I never had an auto. Auto's were pretty rare in those days as they were miles behind a manual (unlike today's ZF six speed?)
|
||
03-09-2009, 09:15 PM | #13 | ||
FF.Com.Au Hardcore
Join Date: Sep 2005
Location: Gisborne Victoria
Posts: 2,662
|
2 speed auto was available on mk 2 Zephyr and Zodiac
|
||
07-09-2009, 11:00 PM | #14 | ||
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Melb north
Posts: 12,025
|
the mark 4 looks very much like a 1968 cd Cortina except with dual head lights, as for the Customline my dad had a late 50`s model with an auto .....not sure how many speeds.
|
||
08-09-2009, 11:09 AM | #15 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
The aussie made 1956 customline got a 3 speed auto. the first of what is called a FMX i think. just that it's smaller than the falcon FMX. from what i can work out. there is 4 sizes with a cast iron case from 1951 that were made.
I think the zephyr MK III got a 3 speed auto. the first of the borg warner 35's called a DG B/W. I have info on the aussie made 1963 wolseley. it came with a B/W 35 it has only L & D not L S D on the stick like some falcon XR falcons. and maybe XP? In a test it saying, if ya pull the shifter back to 1st it will go into 1st at 8 MPH and no higher. then if ya hold it flat in 1st and if you wont to get 2ed you have to pull the selector back to L and it will hold 2ed. The 1963 fairlane only had a 2 speed auto. and the falcon only got the 3 sp auto in the 1965 XP. and the ford galaixe got the 3sp C6 in 1966 i think. and holden's 1st 3 sp auto was in the 1960 EJ to 1964 EH then only 2speeds until the traumatic 3sp auto 1970 HG. Anyone know more about this stuff. |
||
08-09-2009, 11:40 AM | #16 | ||
Regular Member
Join Date: Apr 2006
Location: Melbourne
Posts: 30
|
That car brings back memories.
Dad had one. And as a kid, I remembered the floor in the back was rusted through and I could see the road passing by. He had the car for a long time, and ended scraping it. |
||
08-09-2009, 07:55 PM | #17 | ||
FF.Com.Au Hardcore
Join Date: Apr 2008
Posts: 5,482
|
Hi From memory the DG (in the MK2 ) was a 3 speed dual gate (L+D)and it had a lock up torque converter just like lots of cars now but rare in those days and the MK3 had a bw 35 again just like early falcons and also dual gate, that is above a certain speed pulling it to low would drop it from 3rd to 2nd then when the speed droped right down from 2nd to 1st. cheers MD
|
||
08-09-2009, 08:36 PM | #18 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: brisbane
Posts: 1,316
|
How many mistakes in one post as I recall
for a start it was 1957 and Ford 7a Customline had a 'Fordomatic" 3 speed (where do you think we got the "FMX" name from) Chrysler had a manual overdrive you could also get a Standard 10 ( think Triumph) with push button clutch on top of the gear stick Holden got 3 I repeat 3 speed auto in 1961 with the EK and then 2 speed with the HD/HR and back to 3 speed in the HK but not the V8s they were 2 speed I had the pleasure of winding out a brand new HK Premier 307 "5 Litre " to 75 MPH in first gear but still couldnt get away from a BMW 2002 Zephyr had BW 35 in 1961 along with Wolsely and Austin Freeway and Mk 2 Jags Falcons on debut were 2 speed air cooled transmissions they werent conected to the radiator and dont forget Valiants had auto from 1962 push button "Torque flite" 3 speed thats my recollections thanks John |
||
This user likes this post: |
09-09-2009, 11:31 AM | #19 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
FORD use the name's
cruse-o-matic ford-o-matic But that has nothing to do with what actual auto trans that is actually in it. As i see it the customline auto is not a FMX. but the first of what was to become a FMX, but smaller. how good it was or performed i don't know. The 2 sp in the falcon XK-L-M-P were 3rd rate rubbish. The 3 sp B/W35 from what i can work out there is 2 versions in the XR falcon the std one has L S D and the one called cruse-o-matic has L and D ONLY. but both are B/W35 auto's. and this was a option on 6 cyl and 289 V8. and with the cruse o if i am right you could take off in 2 ed gear for snow or mud? And as far as i know in the XT-W it's the same with the 6 cyl but they had a L S D selector. and the V8 may of got the C4 auto. but i am not 100% sure when the first falcon got the C4 auto. i think it was XW, when ford was boasting of a "DRIVERS AUTO" one that you could use like a manual with the T BAR. Now with this C4 auto, like the B/W35 with the cruse option, you could take off in 2ed if you wanted to. but the B/W35 was not a drivers auto, but a grand par's auto. how it performed. and in std form FMX and C6 auto's can't match a C4, for spirited driving style. |
||
09-09-2009, 11:58 AM | #20 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
Yes last fairlane.
1961 EK is a 3 sp auto. The EJ to EH may even be called a 4 sp auto. weird how it works. Holdens had 2 sp powerglide from HD to HT in 6 cyl and all V8's and also in the HG 350. were as all other HG got the trumatic 3 sp auto. Valiant RV1 & SV1 were a fine auto. do you know when valiant went to the B/W35 in the 6 cyl. I am thinking maybe the VH. |
||
09-09-2009, 01:55 PM | #21 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: brisbane
Posts: 1,316
|
yes I beleive it was when the first "hemi" came out they went to an Aussie motor and trans as well as diff
and maybe it was also a bit cheaper to go with the Ford pattern which BW was already making instead of the Val stud pattern also has any one heard the story about the Hemi engine plant sent over to Austria back in the eighties to the Jeep plant if you get a chance have a look at an early 90s Jeep and check out the donk it looks a lot like a 245 Hemi motor with EFI attached to it and the badge 4 Litre high output 245CI = 4 Litre just what Ive heard and seen thanks John |
||
10-09-2009, 02:30 PM | #22 | ||
FF.Com.Au Hardcore
Join Date: Jan 2008
Location: brisbane
Posts: 1,316
|
Which one was more advanced (Australian model only)
1952 Mk1 Zephyr ----------------- Fx Holden 1948/52 one piece curved windscreen ------ 2 piece flat windscreen swinging pedals -------------------through the floor pedals macpherson strut front end---------king pin front end until 1965 floating axle back end -------------keyway and key hubs indicators (little orange arms)------ none (hand out the window) stop and tail lights (2) -------------stop and tail lights (1) 3 box shape-----------------------humpy shape 12 volt system--------------------6 volt system convertable available--------------ute and panel van available Zephyrs were 100 Pounds ($200) more expensive than a Holden and even then they were advertised as "Australians own car" which got people in these are some of the things I recall from owning five Zephyrs and a couple of Consuls from Mk1 to Mk3 both cars were crude compared to today but horses for courses in my eyes nothing has changed except we have Falcons and they have Commodores thanks John Last edited by last fairlane; 10-09-2009 at 02:35 PM. Reason: spelling mistake |
||
This user likes this post: |
10-09-2009, 04:19 PM | #23 | ||
FF.Com.Au Hardcore
Join Date: Apr 2009
Posts: 2,215
|
Yes a mate bought one of those jeep's new. and that is what the dealer told him. that it was the old 245 hemi motor basically.
$200 back in 1952 = $2000 or more in today's money. So the RV1 to VF valiant's don't have a B/W diff. I thought they were the same. what are they? Do you know if there a deference between the XK-L-M-P falcon diff, to the XR-T-W-Y B/W diff. John. I think there is a 7.5 inch and a 7.75 inch B/W diff in the XA-B. weather it's just in the crown wheel? i think the 3.23 ratio were 7.5 inch and the 3.27 was a 7.75 with extra teeth in the ute's. there is bugger all in those ratios and even in 1993 the XG longreach got the 3.27 and the 1993 sedan got the 3.23 ratio. and then there is the 4 star centers in the XRGT & some ute's like XR-T had that std. but i don't think from the XW on got that center. but XG on do. |
||
11-09-2009, 12:22 AM | #24 | ||
XM FALCON
Join Date: Nov 2005
Location: Hervey Bay
Posts: 515
|
Wish i still had my Mk3 Zephyr
4speed manual, power assit disk brakes all in 1964 |
||
This user likes this post: |
30-09-2009, 09:45 AM | #25 | ||
Starter Motor
Join Date: Sep 2009
Posts: 3
|
I got a mk II zephyr I've had for 10 years now. it was the first car I ever bought and I will eventually pull it down and rebuild it. The shape of these cars are pretty good and have the potential of being a very nice cruiser.
|
||
30-09-2009, 10:28 AM | #26 | |||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
Quote:
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
|||
30-09-2009, 09:33 PM | #27 | ||
FF.Com.Au Hardcore
Join Date: Oct 2005
Location: Hervey Bay
Posts: 4,198
|
Small piece of absolutely useless information ... The Mk1 Zephyrs had the same clutch as the 4 cylinder Consuls and used to trash them regularly due to the disparity in horse power. When I was an apprentice, my boss and I working as a team, could change a Zephyr clutch plate in 20 minutes.
|
||
This user likes this post: |
30-09-2009, 10:02 PM | #28 | |||
FF.Com.Au Hardcore
Join Date: Apr 2007
Location: Miranda, NSW
Posts: 6,771
|
Quote:
The Zephyr was a common site on our roads in the 60's and 70's and will always be remembered
__________________
2005 BA MK2 FPV GT - 6 SPEED MANUAL , SILHOUETTE, SWISSVAX, SUNROOF, BILSTEIN AND LOVELLS, FACTORY GENUINE 19'S, X-FORCE STAINLESS QUAD CATBACK, ADVANCE HEADERS, 200 CPSI CATS, BLUEPOWER CAI, HERROD BREATHER KIT, 4:11 DIFF RATIO, MAL WOOD OPT 3+ CLUTCH, BILLET SHIFTER, MELLINGS 10227, NOW WITH REVERSE CAMERA/SENSORS, ALPINE SPEAKERS & SUB - CUSTOM TUNED TO 275 RWKW NOW WITH A NEW ADDITION - 2017 MUSTANG V8 GT FASTBACK - , 6 SPEED AUTO IN PLATINUM WHITE, |
|||
30-09-2009, 10:21 PM | #29 | |||
Regular Member
Join Date: Jul 2008
Posts: 228
|
Quote:
Last edited by torbirdie; 30-09-2009 at 10:37 PM. |
|||
02-10-2009, 10:27 AM | #30 | ||
Performance moderator
Join Date: Feb 2005
Location: St Clair..N.S.W
Posts: 14,875
|
Comparing a mid 60's model to a 70's car is a little unfair ??
Besides back then the Cortina would be fairly new.. Plus the difference in engine size.. 2.6 against 3.3 or 4.1.. Not that the 3.3 was a grunt machine...
__________________
Real cars are not driven by front wheels,real cars lift them!!... BABYS ARE BOTTLE FED, REAL MEN GET BLOWN. Don't be afraid to try something new. Remember, amateurs built the Ark...Professionals built the Titanic! Dart 330ci block turbo black pearl EBXR8 482 rwkw.. Daily driver GTE FG.. Projects http://www.fordforums.com.au/showthread.php?t=107711 http://www.fordforums.com.au/showthr...8+turbo&page=4 |
||