Auto Window Down for AU Ute

[leonbray]

I'd like to add auto down to the driver's window of my AUIII XLS

I've looked at adapting the master switch unit from Ghia but couldn't figure out how to get it to fit into the ute two (2) switch moulding - like it was suggested in one of the other threads.

I'd prefer to have just 2 window switches in the drivers side armrest, with auto down on drivers window

Am I missing something?

[FGII-XR6]

can't be done without major rewiring the whole wiring harness and BEM are different you would need to modify a high series sedan main body harness then use a high series BEM and change both door harnesses, even then you would still have a 4 switch unit in the drivers door with 2 dead switches

[Ladiesman217]

I was just thinking about the same thing today in my ute 'bout 2 hours ago. Damn I miss that auto-down button :(

[foxtrot3]

Hi. DEI ( http://www.directed.com.au ) have a window lift module which gives one touch up and one touch down without an alarm and with almost any alarm windows up on locking and with a suitable alarm you can add window vent (down 25mm at a time) or window open. Put one in a mates xh and its real trick. Cheers MD

[leonbray]

http://www.ponyperformance.com/specials2.html

just found this one that might work

[foxtrot3]

Originally Posted by leonbray

http://www.ponyperformance.com/specials2.html

just found this one that might work

Hi. Looks like a bargain but check the international shipping cost before you order one. Cheers MD

[Ladiesman217]

Originally Posted by foxtrot3

Hi. DEI ( http://www.directed.com.au ) have a window lift module which gives one touch up and one touch down without an alarm and with almost any alarm windows up on locking and with a suitable alarm you can add window vent (down 25mm at a time) or window open. Put one in a mates xh and its real trick. Cheers MD

I couldnt find one on their website

[foxtrot3]

Hi. Try this one http://www.ebay.com.au/itm/Viper-DEI...#ht_548wt_1396 . Cheers MD

[Ladiesman217]

Mmm, that's a window lifter.

[foxtrot3]

Originally Posted by Ladiesman217

Mmm, that's a window lifter.

Hi. Very clever Thats what I said it was AND it does one touch up and one touch down (just by itself-no alarm needed) and with any alarm a window lift and with a suitable DEI alarm window vent and open....NOW PAY ATTENTION THIS TIME, I might be asking questions later. Cheers MD

[foxtrot3]

Hi. Sorry I was wrong..... ...... The window lift module that does everything I said is the DEI 530T (not the 529T) Cheers MD

[leonbray]

Originally Posted by leonbray

http://www.ponyperformance.com/specials2.html

just found this one that might work

I ordered one of these. Based on discussions with the vendor and details of AU wiring diagram, it should work on the ute

Will post an update. Hopefully it will arrive tomorrow and I can get it done over easter

[Ladiesman217]

Awesome, cant wait to see a result!

[leonbray]

OK - the PonyPerformance one touch window module kit will work in an AU ute

This is what you get in the kit



and you need to follow these instructions




but use the AU wiring diagram to find the right wires




The wiring conversion from the Mustang swith to the AU switch is

Blue/Black = Grey/Yellow
White/Black = Yellow
Yellow = Red
Black = Black

This is what you get in the kit



Remove the Switches by gently levering the trailing edge of the switch panel. It is held in place by a spring clip




Remove the plug from the switch (the white plug is the drivers window) - you have to reach between the switches and depress the catch while you wiggle the plug to break contact with the switch



Eyeball the switch so you know where the wires run. Check that the grey/yellow wire is 12V when the the ignition switch is in accessories or ignition.



If you wire the unit into the loom using the included wire tapping terminals, you will not be able to get the switches back into the arm rest because of the bulk of the terminals



The unit will fit more easily if you solder the wires from the unit with the appropriate wires from the switch or join the wires by replacing the female terminals in the plug



The one touch unit will fit inside the front or rear of the armrest



Test that everything works before reinstalling it all

[Ladiesman217]

Wowee-whoa-whoh! Good stuff, I think I'm a purchase me one of these right now. Thanks mate!

[CFOUR]

Simple wiring instructions
Cut loom yellow.
Plug/switch end of yellow to module black & white
Module red- cut loom yellow
Splice module yellow to loom red
Splice module black to loom black
Splice module green/yellow to loom brown/yellow.