|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
30-04-2017, 10:07 PM | #1 | ||
Regular Member
Join Date: Feb 2011
Posts: 70
|
I have just bought a seies 2 v8 fairmont ghia has a tickford id plate in the engine bay and badges on the guards.Does anybody know what spec the motor should be and what the diff ratio should be.Also any ideas why traction control and abs symbols would be stuck on?
|
||
30-04-2017, 10:25 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Apr 2012
Location: Adelaide
Posts: 2,802
|
Hi mate,
The motor will be 175kw spec (Base model, no tickford extractors no twin 2 1/4 press bent exhaust) The diff ratio will be 3.23, more than likely lsd. The traction light and abs light is an issue ive had before, its in the electronic part of the abs module, common fault, and something inside it fails, i had to send mine away for repair. Repair was about $150 through a seller on ebay. You can remove the electronics part while leaving the abs module in the car (meaning you dont have to remove brake lines etc) Turn around time was about a week. Installed the repaired module and havent had an issue since. http://www.ebay.com.au/itm/Ford-AU-2...EAAOSwgQ9Vkm8n This is the seller i went through, recommend the service.
__________________
Current Car: 2002 AUII LTD 408ci Windsor, T6 S488, TH400, 2 Piece Shaft, Helicial LSD 3.23 IRS Daily: 1998 Mitsubishi Super VR-4 Legnum |
||
01-05-2017, 05:47 PM | #3 | ||
Donating Member
Join Date: May 2008
Posts: 12,561
|
As mentioned you will have the 175 kW 5.0 Windsor V8.
The diff ratio will be 3.23. The VCT 6 had 3.45. Fairmont Ghia didn't have a standard LSD. The availability of a LSD on the Ghia is a bit hard to pin down. For AU series the LSD wasn't available with IRS, so Fairmont only. For Series 3 LSD was only available when sports IRS was optioned on the Ghia. For series 2 I cant find any reference to an LSD in the appropriate brochure specs.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
||
02-05-2017, 02:14 PM | #4 | ||
Regular Member
Join Date: Feb 2011
Posts: 70
|
Thanks for the replies sits on about 2200 at 110 kmh is definately an lsd.Also it has herrod extractors but is only a single exhaust.One other thing i have noticed is it has what sounds like a diff whine but only at low speed at 110 cant really notice it ,is this common on an au?
|
||
02-05-2017, 02:20 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Jul 2013
Location: New Zealand
Posts: 664
|
The diff ratio on my V8 Ghia is 3:45 lsd, series one though. If you can be bothered if you get under it there will be a metal tag on the diff stating Lsd and there should be a sticker also which gives info about the ratio.
|
||
02-05-2017, 05:00 PM | #6 | |||
Donating Member
Join Date: May 2008
Posts: 12,561
|
Quote:
That would explain it having an LSD, ie being part of the Sports IRS package.
__________________
PX MK II Ranger FG XR6 FG X XR8 Mustang GT T3 TS50 - gone but not forgotten |
|||
02-05-2017, 05:22 PM | #7 | ||
Regular Member
Join Date: Feb 2011
Posts: 70
|
On the tickford plate it only says momo steering wheel ,bodykit and 17in alloys
|
||
02-05-2017, 06:04 PM | #8 | ||
FF.Com.Au Hardcore
Join Date: Jul 2013
Location: New Zealand
Posts: 664
|
was going to try post this earlier
Magazine Scan With final drive ratios that should summaries the spec of the diff ratios, unless they deviated from what was published. They wernt specific about the V8's option. If you did want to know the exact options i believe you can also get that info from ford, build numbers ect. |
||
03-05-2017, 10:13 AM | #9 | ||
FF.Com.Au Hardcore
Join Date: Jun 2006
Location: Western Australia
Posts: 2,195
|
Any pics of the Tickford Ghia? I'm keen to see it as I also have an Series II Ghia but mine only has the bodykit option (and SatNav) as far as I know.
Yours must have black trim if it's got the Momo steering wheel as I'm not sure I've seen a grey Momo wheel in an AU before. |
||