|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-11-2010, 08:10 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2006
Location: tweed coast
Posts: 94
|
Yeah hi just wondering wether someone might
Be able to help me out with timing marks on a 1.6 ohc kh Laser, dizzy, cam, etc.. Cheers XEESPT |
||
|
|
|
30-11-2010, 07:24 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
take out the number one plug
put your finger in the hole and wait as you turn over the motor by hand till you feel the compression stroke on number one at the top of the stroke is TDC the crank pully should line up with the timing mark
__________________
My car goes Brumm Brumm |
||
|
|
|
Setting timing kh laser
Linear Mode
