|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
31-05-2005, 11:28 AM
|
#1 | ||
|
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Guys, just want to know what the BCM controls?
AFAIK, it's power windows and cruise control. What else does it control?
__________________
Carless
|
||
|
|
|
31-05-2005, 12:35 PM
|
#2 | ||
|
fully *** turboooo
Join Date: Dec 2004
Location: Eastern Suburbs, Melbourne
Posts: 523
|
everything but the engine and trans?
__________________
AU1 Forte 178.6rwkw @ 5 psi Highflowed T03, Intercooled Full comp insurance :nutsycuck
|
||
|
|
|
|
31-05-2005, 07:29 PM
|
#3 | ||
|
Chairman & Administrator
  
Join Date: Dec 2004
Location: 1975
Posts: 107,237
|
The BEM controls:
LOW SERIES MODELS • Manual control of illuminated entry and exit delay • Manual boot release with security time out and speed dependant disable • Remote central locking with hazard acknowledgment • Manual central locking • Remote drivers door lock /unlock • Panic alarm • Key in lock warning horn/hazard • Anti-Theft warning LED • Remote control for illuminated entry • Remote boot/ tailgate release with hazard acknowledgment • Door unlocked horn/hazard warning • Automatic door relock timer • Transponder challenge/response immobilisation • Heated backlight timer • Front intermittent wiper timer with fixed dwell, wipe on take off • Front wipe after wash timer with fixed number of wipes • Diagnostic capability of inputs, outputs and trouble codes • Diagnostic self test • Battery saver for dome, boot and glovebox lamps • Power window supply control with key off HIGH SERIES MODELS The additional functions to the low series are as follows: • Front intermittent wiper dwell timer with variable dwell and speed dependency • Front washer motor control • Instrument cluster illumination (LCD & Graphics) control • Power antenna control • Automatic headlamp switch off action with manual override • Headlamp warning chime, headlamps on, ignition off. Mid series vehicles use a high series BEM with a number of the functions disabled. Examples are headlamp delay, single dome lamp circuit, no front washer control. Cheers Russ
__________________
 Observatio Facta Rotae
|
||
|
|
|
|
01-06-2005, 10:17 AM
|
#4 | |||
|
Adapt or perish...
Join Date: Jan 2005
Location: Dip!@#$
Posts: 7,954
|
Quote:
Sounds stupid, but I'm actually learning something new here.
__________________
Carless
|
|||
|
|
|
AU BCM - What does it control?
Linear Mode
