|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
The Pub For General Automotive Related Talk |
|
Thread Tools | Display Modes |
03-06-2021, 08:00 PM | #1 | ||
RS The Faster Fords
Join Date: Feb 2014
Location: Westralia
Posts: 1,694
|
As per the title has anyone got any stories of car modifications you've later regretted.
For me it was fitting a set of bonnet pins to my Escort. A straight rust free RS bonnet no less. I remember marking the top then with the Dads old single speed Black and Decker drill I punched holes through the bonnet straight through the inner wing. That one haunted me many years later when it came to repairing the vandalism, having to carefully weld an otherwise perfect bonnet. So whats the one you regretted?
__________________
Escort RS2000 Restored factory a/c and alloys. TD Cortina Unrestored 35 000km 6cyl manual. Mk1 GT Cortina Project. FG XR50 Daily. Last edited by Rallye Sport; 03-06-2021 at 08:08 PM. |
||
3 users like this post: |
03-06-2021, 08:42 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
Cutting out what I thought was an old spotlight relay on the HR when I was very young and dumb.
It was the regulator. |
||
8 users like this post: |
03-06-2021, 08:47 PM | #3 | ||
FF.Com.Au Hardcore
Join Date: Nov 2005
Posts: 1,033
|
Back in the 1980's I put a set of Pedders "sport" dampeners into my XC Falcon. It was a big mistake in that it made the front suspension really choppy. Like I had put in a massive anti-roll bar. Towards the end of my time with the XC, I replaced the "sport" dampeners with standard gas dampeners. The improvement in ride was remarkable with no real loss of handling. A close second was installing polyurethane bushings in the rear suspension.
However, other suspension mods worked out OK. Installing a rear anti-roll bar (my model XC was fitted with one). Upgrading the front anti-roll bar. Replacing the dampeners (once I had figured out the right ones to use). A really big improvement was having the steering box out on the bench and the Ford Dealer follow the book process to remove all of the free play in the box. |
||
2 users like this post: |
03-06-2021, 09:04 PM | #4 | ||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,210
|
Putting my XC on gas.
Not so much the gas, but the plonkers drilled a hole next to my fuel filler cap for the gas filler cap. I specifically said I wanted the filler at the back attached to the tow bar. They said the legislation said it had to be there. I pointed out that the legislation said it was preferable, not a requirement. Oh well.
__________________
jaydee351 4DV8 |
||
3 users like this post: |
03-06-2021, 09:43 PM | #5 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
Yeah gas. Pffft.
Rodeo 2.6 Backfires blowing apart intake tubes, exhaust valves being eaten (flashlube is only good for intake valves), plugs ditto, no power, injectors getting burnt, extra heat cracking the exhaust manifold, gas tank undertray accumulating stones and dust and rusting out the tank etc etc. |
||
This user likes this post: |
03-06-2021, 10:25 PM | #6 | ||
Regular Member
Join Date: Jul 2020
Posts: 124
|
It was the 80's, i was determined to have a schmick engine bay with dayglo orange rails and dayglo yellow rocker covers, oh and bird**** in the engine bay because. Part of this idiotic plan involved moving the battery to the boot, and then spending months dealing with dim lights and other associated voltage drop and poor earth issues.
|
||
04-06-2021, 02:15 AM | #7 | ||
FF.Com.Au Hardcore
Join Date: Nov 2009
Location: Perth
Posts: 1,671
|
It was the 90's, so I blacked out all the window chrome on my rx3. Also sprayed the white vinyl interior black. The interior looked forever stuffed as vinyl paint sucked back then and I was a noob, irreplaceable window chrome ruined (808s didn't have chrome around the windows, at least I could get replacement front and rear screen chrome from an 808, but the side windows, ruined forever).
Also hacked up parts of the dash and shifter console for gauges and stereo. I did the battery relocation to the boot as well. NFI why, maybe I was dreaming of a huge turbo one day. I didn't get any power problems as I got huge cables from work. But it was pointless, dumb and most things put in the boot was ruined just because of fumes I think, corroded amp and speaker terminals, stinking sleeping bag etc LOL It was a $1400 car at the time but all that stuff was mega expensive by the time I parted it out years ago, let alone now them being just under 100k cars now. These days when I grab an older car I'm restoring to stock as much as I can, undoing dumb previous owner sh!t, but 30 years ago I was the dumb 'previous owner'. Last edited by oldel; 04-06-2021 at 02:22 AM. |
||
2 users like this post: |
04-06-2021, 07:28 AM | #8 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,275
|
1. Cutting up several newish front HJ-Z chrome bumpers and grilles to make a custom Caprice clip on an ill-fittng fibreglass tilt front.
Never did fit the butchered bumperettes. 2. Buying a Daihatsu Delta as the basis for a motorhome.
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
8 users like this post: |
04-06-2021, 08:36 AM | #9 | |||
FF.Com.Au Hardcore
Join Date: Oct 2008
Location: Victoria
Posts: 7,854
|
Quote:
__________________
______________________________ 2015 Territory Titanium RWD Diesel - SOLD 2016 BMW X5 xdrive 30D Msport Seadoo Challenger 210SE 310HP |
|||
This user likes this post: |
04-06-2021, 08:43 AM | #10 | ||
FF.Com.Au Hardcore
Join Date: Oct 2008
Location: Victoria
Posts: 7,854
|
Mine was on an Escort too.
I had a 1600 x-flow with an A3 Cam with a weber twin throat down draft. it ran ran well and had a lumpy idle which I loved. But I wanted better and bought a set of twin dellorto side drafts, gone straight away was the lumpy idle and we could never get it to rev properly. was getting back fires etc. well one day it back fired as I drove in my drive, I didn't realise it caught fire - tried putting it out wit the garden hose but needed the fire brigade in the end.. My parents convinced me to write if off through insurance..
__________________
______________________________ 2015 Territory Titanium RWD Diesel - SOLD 2016 BMW X5 xdrive 30D Msport Seadoo Challenger 210SE 310HP |
||
2 users like this post: |
04-06-2021, 09:44 AM | #11 | ||
FF.Com.Au Hardcore
Join Date: Oct 2020
Posts: 670
|
Not a mod per se but since escorts have come up, was given a 76 escort 2 door (XL i think?) with a 1.3 , manual, sold it for 1300 bucks in the 90s. Was more or less mint too, really good nick.
Whats one of them worth now? |
||
This user likes this post: |
04-06-2021, 09:46 AM | #12 | |||
FF.Com.Au Hardcore
Join Date: Nov 2005
Posts: 1,033
|
Quote:
|
|||
04-06-2021, 09:56 AM | #13 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
And the gas system on that Rodeo ate a head gasket too.
Gas. Rubbish. |
||
04-06-2021, 10:22 AM | #14 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
Decided I was going to be a hippy in 1982 so I bought an old Kombi with an engine knock. It had a sliding door on both sides (to give access in narrow European alleys).
Pulled down the engine - the knock was the crankshaft broken right through a counterweight. Decided to be a bogan hippy and fitted oversized barrels, extractors, cam, mechanical advance distributor, Weber, oil cooler, twin port heads etc. Would do about 130 flat out. But it got hot and the grease used to install the rear main seal loosened the big screw holding the flywheel onto the crankshaft. Changed that out while tripping but managed to get it right. The overheating was eventually fixed with a high-volume oil pump but a head cracked between an exhaust valve seat and the plug during a high-speed insanity run one moonlit night (now that’s a story ...). Regretted all that madness slightly later on but at the time it was fun - the bus would lift the front wheels off the ground if both side doors were slid back ! |
||
04-06-2021, 10:34 AM | #15 | ||
Banned
Join Date: Jan 2009
Posts: 1,621
|
|
||
04-06-2021, 11:01 AM | #16 | |||
FF.Com.Au Hardcore
Join Date: Feb 2007
Location: Perth
Posts: 7,210
|
Quote:
__________________
jaydee351 4DV8 |
|||
4 users like this post: |
04-06-2021, 11:33 AM | #17 | |||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
Quote:
The bits I can remember anyway. As for the other bits .... who knows ? Maybe someone. If they can remember. Two Pommy hitchhiking backpackers could relate being terrified by the antics of two degenerates in a Kombi doing a crazy midnight run on a part of a highway known for murders. The degenerates were harmless of course but they weren't to know that. |
|||
2 users like this post: |
04-06-2021, 11:40 AM | #18 | ||
Kicking back
Join Date: Dec 2013
Location: Western sydney
Posts: 8,675
|
I dunno if this is classed as a mod, but when i was 17 i was dailying a wb ute. The thing had an efi 304 and th700 4 speed auto. The speedo never worked as the auto had the sensor in it not a cable, which the speedo needs. Turns out the cable from a th350 works when you pull the sensor out. The motor trans conversion was done by a prior owner who to fit the 4 speed auto hacked the trans tunnel with tin snips. So i had a bit of metal go straight through my thumb. 17 years later and i still have no nail on that thumb. I probably should have stuck with the seat of the pants speedo.
|
||
This user likes this post: |
04-06-2021, 11:46 AM | #19 | ||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,552
|
Putting urethane on any Ford I've owned more than the areas it does the job ie link pins/pan hards.
Rotton stuff IF you put it everywhere front to back, never again. Putting in a new stereo was a mod back in the day no Keeping a crappy cassette deck that loved eating up the tapes, why o why did I keep persisting thinking it wouldn't happen again lol....I think it was a Clarion ! Who recalls getting a pen and rewinding the tape back to then get to the point of hoping you won't snap it where it was caught inside.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
5 users like this post: |
04-06-2021, 12:42 PM | #20 | ||
Youth worker
Join Date: Dec 2007
Location: Ipswich QLD
Posts: 6,880
|
Buying and fitting a Snort Performance twin screw supercharger to my old BA Futura. I didn't have the car for over 6 months as they used my car as a test bench. They finally couldn't get a tuner (they used 4 of them) to get the thing to work so they fitted one of Snorts highest end Garrett turbo kits which turned out to be a anything but a Garrett...
It became so frustrating I ended up getting rid of the car entirely not long afterwards.
__________________
2007 FPV F6 Typhoon BFII, Neo. Build Number 325 2011 SZ Territory Typhoon Thread: Mr Brooksy's BFII Typhoon Territory Thread: Mrs Brooksy's SZ Territory Resurrection Old Futura thread:
Brooksy's Ex Build |
||
This user likes this post: |
04-06-2021, 01:06 PM | #21 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,275
|
Try that with a 8 track.
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
This user likes this post: |
04-06-2021, 02:36 PM | #22 | ||
FF.Com.Au Hardcore
Join Date: Oct 2010
Location: Perth, WA
Posts: 648
|
The original owner of my VK put the car phone aerial in the middle of the roof.. dik move
__________________
FGII FPV F6 #406 BFII FPV F6 Typhoon R Spec #118 VK HDT Group A/Group 3 #3249 |
||
04-06-2021, 02:49 PM | #23 | ||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,552
|
yep nup, I didn't buy one of those back then for as you know, cassettes became the next best thing.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
This user likes this post: |
04-06-2021, 03:05 PM | #24 | |||
Regular Member
Join Date: Mar 2011
Location: Southern Tablelands NSW
Posts: 475
|
Quote:
That was in 1985 and it hasn't come yet. Must be on backorder I suppose
__________________
Fordless Stuff this,I'm going to play a few shots & see what happens. |
|||
9 users like this post: |
04-06-2021, 03:14 PM | #25 | ||
FF.Com.Au Hardcore
Join Date: Jun 2010
Posts: 589
|
Another HR story.
Had a boat trailer with a heavy drawbar weight. Fitted pump-up shockies (Gabriel HiJackers - remember them ? And Speco floor shifts, air horns, racing harnesses, thick-rimmed steering wheels, variable wiper kits, electric radiator fan kits, water ‘injection’ kits that were just vacuum bleeds etc.). Anyway. The rough old Bruce Highway punched a shocky through the boot when the steel split. Welded it up without worrying about the fuel tank being nearby. |
||
04-06-2021, 03:50 PM | #26 | ||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,552
|
another cheap easy mod back in the day that at times was a waste of time.
Dress Rims, how many times did the hubcap let go because the bloody dress rim didn't allow enough bite left for the hub cap to fix properly on the rim ! LOL flying saucer spinning down the road. Cheeez Vekgib, now that is another ol one to mention, they sure did have some crap service back then, the maccas of the stereo/alarm world, hope that BO gets fulfilled before petrol is banned for that rippa cruise listenning to Pink Floyd through the Voxson.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
||
This user likes this post: |
04-06-2021, 03:52 PM | #27 | |||
T3/Sprint8
Join Date: Jan 2005
Location: Australia
Posts: 16,552
|
Quote:
remember the HiJackers well, used to use those shocks having fitted such large wide tyres on the rear to help avoid the gaurds chewing out the outside egde of the tyres lol...... SAAS small steering wheels, always another mod.
__________________
Tickfords T3/TS50 '02 Sprint8 manual Sept 24 '16 Daily Macan GTS "Don't believe everything you read on the internet. Abraham Lincoln" |
|||
4 users like this post: |
04-06-2021, 04:16 PM | #28 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,275
|
Chrome tramps bars.
Blow a tyre and its like being on ski's but loved them anyway. Funny how big steering wheels are coming back.
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
3 users like this post: |
04-06-2021, 04:19 PM | #29 | ||
Donating Member
Join Date: Jan 2005
Location: Morayfield
Posts: 28,091
|
Everything after "I might give this engine a freshen up"....
__________________
I love Holdens.... |
||
11 users like this post: |
04-06-2021, 07:34 PM | #30 | ||
FF.Com.Au Hardcore
Join Date: Jul 2005
Posts: 1,203
|
That one cuts deep
__________________
Had EB XR8 AU XR8 220 (awsome car ) AU Fairmont BA MK2 XR6 Turbo Now XDUB |
||
4 users like this post: |