|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
17-05-2013, 03:43 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 15
|
I've been told I need a 5 point t50 bit to remove the steering wheel, would the t50 in that set be the part i'm looking for?
http://www.supercheapauto.com.au/onl...d=326051#Cross Thanks |
||
|
|
|
17-05-2013, 04:01 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2007
Location: Port Lincoln, SA
Posts: 5,134
|
Pretty sure its the 6 point star looking one from memory.
i bought one of those packs of multi adaptor drill bits with about 30 bits. A little more expensive but so many more bits
__________________
cheers Shaun Current SY FPV F6X Territory #214 Previous FG MkII G6E Turbo built by Heinrichs Performance and Tuning BFII FPV TORNADO #0021 351rwkw - Heinrich Performance and Tuning "Milk is for babies. When you grow up you have to drink beer" - Arnold Schwarzenegger |
||
|
|
|
|
17-05-2013, 04:05 PM
|
#3 | ||
|
Starter Motor
Join Date: Feb 2012
Posts: 15
|
oh really? might just ring ford to get a surefire answer. thanks mate
|
||
|
|
|
|
17-05-2013, 04:55 PM
|
#4 | ||
|
64 Deluxe 4 door
 
Join Date: Jun 2007
Location: Raxacoricofallapatorius
Posts: 10,392
|
T50 Torx. 6 point. Buy a decent one if you plan on using it more than once. It also fits seat and seatbelt bolts. I would try and get a 1/2" one, rather then 3/8. Try Repco/Bursons or a tool specialist. Also a fair chance you will need a steering wheel puller, can be done without but its a PITA.
heres one http://gasweld-px.rtrk.com.au/594881....html?___SID=U
__________________
XM Deluxe FG XR50 BA Pursuit Ute |
||
|
|
|
| This user likes this post: |
|
17-05-2013, 07:47 PM
|
#5 | ||
|
not here much anymore
Join Date: Dec 2004
Location: Sthn NSW
Posts: 22,918
|
Should not require a wheel puller to get the wheel off. I have done it without.
__________________
2024 F150 XLT
|
||
|
|
|
|
17-05-2013, 10:46 PM
|
#6 | ||
|
Donating Member
 
Join Date: Aug 2005
Location: St John's Park NSW
Posts: 1,454
|
I did mine without a puller and I changed the screws that hold the airbag on. I used screws with a 10mm head on them to replace, no more trouble.
|
||
|
|
|
|
19-05-2013, 12:32 PM
|
#7 | ||
|
Got Ghia?
Join Date: Jul 2006
Location: Perth
Posts: 999
|
6 point for the steering wheel. 5 point for the airbag. Pain in the **** to find.
If you get stuck for the 5 point airbag one you can cut a slot in a flat blade screwdriver tip and 'make it take it' as we say at work. But you will probably brake the screwdriver tip. i used 3 cheap tips to get the 2 screws out, and replaced them with regular bolts as above.
__________________
2007 BF MKII Ghia V8 - BA GT Exhaust| F6 Intake | Superlows | 19" GT-P's | 30mm Swaybar | - Sold  2002 AU2 XR8 Ute - Manual | Leather | Injected LPG | Pacemakers |
||
|
|
|
Removing AU steering wheel
Linear Mode
