New Exhaust for OZFORDAU!!!!!!!

OZFORDAU · 06-06-2006, 11:01 PM

Hey All,

Well today was a big day for me, finally another major mod! A new JMM Redback 2.5 cat back system! It sounds so fine, it has the sweetest purrr to it and the burble is sooo good!

This is all thanks to G&D! They did an awsome job and they are awsome guys to deal with, i highly recomend them! :sm_headba

Cheers

Simon :hihi: :hihi: :hihi: :hihi:

: :1syellow1

:

Bahaha i showed my mates partents who own a SS n a R8 Clubby n my exhaust owns both of there exahusts which costed over $1000! Hahaha

IM SO HAPPY AT THE MOMENT!!!!!!!!!!!

PS: Also thanks to Krissy (FRDGAL_AU6)

I6corp · 06-06-2006, 11:02 PM

Hahaha sweet as, Good onya

mattp · 06-06-2006, 11:19 PM

Am I rude if I ask roughly how much this kind of thing is worth? I'm keen on getting one at the moment...

Baboon_AU · 06-06-2006, 11:33 PM

no fancy tubes to go with your exhuast?? are you eventually going to get some??

Duffman · 06-06-2006, 11:34 PM

Quote:

Originally Posted by OZFORDAU

Bahaha i showed my mates partents who own a SS n a R8 Clubby n my exhaust owns both of there exahusts which costed over $1000! Hahaha

If the ss/r8 have a decent exhaust system you might think otherwise when they put their foot down! Iv been in a ss with a exhaust system and to be honest well the old Inline 6 just can't compete with a v8.

Its great you finally got an exhaust just wait till you get some extractors and it will sound twice as good again!

Smoked · 06-06-2006, 11:40 PM

Good Work Simon, how much did it set you back?

OZFORDAU · 06-06-2006, 11:49 PM

Quote:

Originally Posted by Baboon_AU

no fancy tubes to go with your exhuast?? are you eventually going to get some??

LOL, i guess ur meaning extrators? If so i've got a bloody gas conveter in the way, but i'll try and move around it!

Cheers

Simon

MIKEVYII · 06-06-2006, 11:49 PM

Sorry Mate I think your Mate was just being nice to you. As there is no way a AU 6 with a off the shelf Redback is going to sound better then either a ford or Holden 8. with a exhaust. nothing beats the V8 rumble :1syellow1

P.s Im sure it sounds really nice tho

OZFORDAU · 06-06-2006, 11:52 PM

Quote:

Originally Posted by Smoked

Good Work Simon, how much did it set you back?

Hey Shan,

I got it fully installed with a gas tune for $324! It's a second hand exahust off Krissy's (FRDGAL_AU6) car! But the exhaust is so close to brand new its not funny...It had only done under 2,000kms if that i think! It's mint as!

Cheers

Simon

: :yeees:

OZFORDAU · 07-06-2006, 12:20 AM

Quote:

Originally Posted by MIKEVYII

Sorry Mate I think your Mate was just being nice to you. As there is no way a AU 6 with a off the shelf Redback is going to sound better then either a ford or Holden 8. with a exhaust. nothing beats the V8 rumble :1syellow1

P.s Im sure it sounds really nice tho

Well the R8 prob sounded a little better, but we tested them whilst they were standing still and mine sound much deeper and had a nice burble then the SS!

I guess we'll see how they both compare wen there on the road! But i know mine sounds sweet inside n out haha!

But like i said to my mates parents it's a totally diffrent ball game....V8's Verses I6.............

Cheers

Simon

:

ing_sm

JC · 07-06-2006, 01:43 AM

Quote:

Originally Posted by OZFORDAU

Hey Shan,

I got it fully installed with a gas tune for $324! It's a second hand exahust off Krissy's (FRDGAL_AU6) car! But the exhaust is so close to brand new its not funny...It had only done under 2,000kms if that i think! It's mint as!

Cheers

Simon

: :yeees:

That's a very good price, even for second hand. Mine was $350 new, but I had to fit it myself (easy as), and I didn't get a tune.

Mine has the extra resonator at the back though, to quiten it down (it's on the family wagon, after all), but still sounds good. And I know what an I6 sounds like with no muffler (in fact no system at all apart from pacemaker extractors - bl0ody loud!), so I can imagine that with a single muffler, it must sounds pretty nice.

Not as nice as my XR8 with single 3" and one muffler, but nice nonetheless.

Good work - is the car running well now?

OZFORDAU · 07-06-2006, 03:05 AM

Quote:

Originally Posted by JC

That's a very good price, even for second hand. Mine was $350 new, but I had to fit it myself (easy as), and I didn't get a tune.

Mine has the extra resonator at the back though, to quiten it down (it's on the family wagon, after all), but still sounds good. And I know what an I6 sounds like with no muffler (in fact no system at all apart from pacemaker extractors - bl0ody loud!), so I can imagine that with a single muffler, it must sounds pretty nice.

Not as nice as my XR8 with single 3" and one muffler, but nice nonetheless.

Good work - is the car running well now?

Yeah it's not idling as rough as it used to, but i think the problem could be in the converter or something like that! It sill wont start on gas!

Cheers

Simon

XR6-VCT-2000 · 07-06-2006, 09:09 AM

Good to hear you got a nice exhaust Simon , good price too

, wd .

whats that problem with ya gas ? will it run on gas after started on fuel , but wont let you start it on gas ?

Baboon_AU · 07-06-2006, 09:05 PM

Quote:

Originally Posted by OZFORDAU

LOL, i guess ur meaning extrators? If so i've got a bloody gas conveter in the way, but i'll try and move around it!

Cheers

Simon

hey simon, i have the egas model falcon with the converter and i have extractors. and the fitted without even touching the converter. i have pacemaker ph4499's.
i just modded the heat sheild, like severely cut it back so it just protects the converter but wont cook or overheat the extractors. look into it mate

heres a photo mate, the gas converter is in the bottom right of the pic

OZFORDAU · 07-06-2006, 09:15 PM

Quote:

Originally Posted by XR6-VCT-2000

Good to hear you got a nice exhaust Simon , good price too

, wd .

whats that problem with ya gas ? will it run on gas after started on fuel , but wont let you start it on gas ?

Yeah the problem is the car isn't starting on gas, but it'll start on petrol then i have to put it on as then.....It's sucha pain.....

Cheers

Simon

StevenAu2 · 07-06-2006, 09:18 PM

Can someone please tell me what the diff is between a JMM Redback exhaust and a Redback exhaust?

FRDGAL · 07-06-2006, 09:23 PM

Quote:

Originally Posted by OZFORDAU

PS: Also thanks to Krissy (FRDGAL_AU6)

You're welcome and thank you for giving me your money :P

I'm glad to hear you're happy with your "tipless" system LOL

:

OZFORDAU · 07-06-2006, 09:35 PM

Quote:

Originally Posted by FRDGAL_AU6

You're welcome and thank you for giving me your money :P

I'm glad to hear you're happy with your "tipless" system LOL

:

Bahaha, i don't need to say anything else lol..........

Cheers

Simon

This is u ---->

:

OZFORDAU · 07-06-2006, 10:38 PM

Quote:

Originally Posted by StevenAu2

Can someone please tell me what the diff is between a JMM Redback exhaust and a Redback exhaust?

I think the only diffrence is that i've got JMM in printed on mine n the other Redback one wouldn't!

Cheers

Simon

StevenAu2 · 07-06-2006, 10:42 PM

Im with JC here,my redback exhaust cost around $350 so you got a good deal!!!

OZFORDAU · 07-06-2006, 10:59 PM

Quote:

Originally Posted by StevenAu2

Im with JC here,my redback exhaust cost around $350 so you got a good deal!!!

Awsome stuff, was urs intalled for $350 as well?

Duffman · 07-06-2006, 11:32 PM

I got a redback exhaust (2 years ago) and it costed $190 installed then an extra $70 for the twin tip. Its got the redback sticker on the muffler and all.

Exhausts seem to have taken a sharp price hike. Iv actually still got the receipt here for it, its from jack beedhams.

phildee · 08-06-2006, 08:14 AM

A place in geelong still does them for $250 fitted I beleive, thats what I paid in October last year. My tip was $100 but that was done later on at another place

DailyDriver · 08-06-2006, 02:08 PM

My SS has an exhaust upgrade, a V6 can't match it. I'm planning on getting Pacemaker headers and Lukey exhaust for the I6 so I'm hoping it will sound half as good as my SS.

Autocade · 08-06-2006, 06:21 PM

Quote:

Originally Posted by StevenAu2

Can someone please tell me what the diff is between a JMM Redback exhaust and a Redback exhaust?

I was told by JMM that they use different mufflers on their cat back system than on the Red Back
I would reckon that they are made to their specs by Manumatic who Manufacture the Red Back and other OEM systems

Smoked · 08-06-2006, 07:07 PM

Quote:

Originally Posted by Baboon_AU

hey simon, i have the egas model falcon with the converter and i have extractors. and the fitted without even touching the converter. i have pacemaker ph4499's.
i just modded the heat sheild, like severely cut it back so it just protects the converter but wont cook or overheat the extractors. look into it mate

heres a photo mate, the gas converter is in the bottom right of the pic

Is that legal to do, and do you had any issues with it?

GK · 08-06-2006, 07:33 PM

A Foot In Both Camps......

All Go.......VXSS.....380bhp

All Show...AU2 SR...210bhp

Careful dancing with the devil now won't you! LOL!

GK

Baboon_AU · 09-06-2006, 06:16 PM

hey smoked, i haven't had any issues with it and the converter has to be hot anyway...remeber it gets its heat from the hot water hoses from your radiator.

i am quite positive it is leagal to have your converter next to extractors. if that was illegal then i would imagine having a standard setup would be illegal also.

and i have a semi heat sheild covereing them so even if cops do see them, i am not fussed

mattp · 09-06-2006, 06:32 PM

I got a quote today for a single muffler 2.5 system (redback) from jack beedham for $210 fitted, so that's only 20 bucks more than duffman paid a couple of years ago. I guess some things haven't gone up that much. Anyone got any experience with hurricane or hi-tech extractors, also got a quote for them, $350 installed. Sounds pretty good to me.

Smoked · 09-06-2006, 07:14 PM

Quote:

Originally Posted by Baboon_AU

hey smoked, i haven't had any issues with it and the converter has to be hot anyway...remeber it gets its heat from the hot water hoses from your radiator.

i am quite positive it is leagal to have your converter next to extractors. if that was illegal then i would imagine having a standard setup would be illegal also.

and i have a semi heat sheild covereing them so even if cops do see them, i am not fussed

Ok. I ask because a member here has been trying to get something similar and according to him, this kind of setup is illegal within NSW. Cheers for your response.