|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
| Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link |
 |
|
|
Thread Tools | Display Modes |
02-07-2015, 11:26 AM
|
#1 | ||
|
Starter Motor
Join Date: May 2012
Posts: 14
|
Hi,
I wrote a post here quite some time ago about problems I was having with my factory brembos on my 09 fg fpv SUPERPURSUIT ute. The original brembo discs were all gone by 52000kms and I have replaced all 4 discs with dba t3 slotted discs and the front pads are ebc red stuff and the backs are a ferrodo type I'm pretty sure. I'm about ready to sell my car and I just want to get the brake pads done so that it stops how it should. What are the pads you recommend for these discs and calliper combination. The fronts are the 6 pot and the rears are the standard. Can you give me a price for a complete set? Cheers Adrian
__________________
If It Won't Go...Force It... Then Force It Some More!! |
||
|
|
|
02-07-2015, 05:32 PM
|
#2 | |||
|
Race Brakes Sydney
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,617
|
Quote:
I would recommend you machine your disc rotors before fitting brake pads and my best recommendation if dust isn't an issue is some Ferodo DS Performance brake pads for the 6/1 combo for $470 delivered or we can supply a brand called Remsa for about $250 delivered. We can do low dust Project MU pads for the front and Remsa rears delivered for $298
__________________
 MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop Street to track is what we expertise in Phone 02 9609 1101 sales@racebrakessydney.com.au www.racebrakessydney.com.au |
|||
|
|
|
Brake pads to use for FG FPV SUPERPURSUIT
Linear Mode
