Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > The Pub

The Pub For General Automotive Related Talk

Reply
 
Thread Tools Display Modes
Old 10-08-2018, 03:56 PM   #1
Nards
Starter Motor
 
Join Date: Jul 2018
Posts: 4
Default FG 2011 XR6 Ute Growning Noise

Hi, first time post I have a what sounds like a front wheel bearing noise very loud low gowning that increases with speed. I haven't replaced front hubs but something tells me its not them car has done 70,000km.
Is there anywhere else I should be looking at for this type of noise is there a history of problems like this for this model vehicle?
Cheers and thanks you....Tony
Nards is offline   Reply With Quote Multi-Quote with this Post
Old 10-08-2018, 06:26 PM   #2
roddy1960
FF.Com.Au Hardcore
 
roddy1960's Avatar
 
Join Date: Dec 2014
Location: St Marys Tasmania
Posts: 3,556
Default Re: FG 2011 XR6 Ute Growning Noise

G'day and welcome to the forums ..If you can't get help here you can't get help anywhere .. I also own an FG XR6 but mine is a car , thankfully no such issues but just because it's only 70K doesn't mean it 's unlikely to be a wheel bearing because nothing like that is guaranteed I'm afraid . Check everything and it still could be a growling bearing unfortunately ...Good luck for a quick cheap fix..
roddy1960 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 10-08-2018, 06:37 PM   #3
.:4:.
Kicking back
 
Join Date: Dec 2013
Location: Western sydney
Posts: 8,685
Default Re: FG 2011 XR6 Ute Growning Noise

Has the car sat for an extended period? I had to do the front wheel bearings in my bf at 107k but it had been more or less keeping the driveway company for about 2 years at the time. It was only 5 years old when they were done.
.:4:. is online now   Reply With Quote Multi-Quote with this Post
Old 10-08-2018, 06:43 PM   #4
Nards
Starter Motor
 
Join Date: Jul 2018
Posts: 4
Default Re: FG 2011 XR6 Ute Growning Noise

G'day, no it hasn't sat for a while ute gets used daily although only 20km per day. It could be the front hubs but for the noise it is making I should be able to feel or hear something when I turn the wheels while vehicle is off the ground on blocks.
Nards is offline   Reply With Quote Multi-Quote with this Post
Old 10-08-2018, 10:07 PM   #5
5thFordWA
Regular Member
 
5thFordWA's Avatar
 
Join Date: Dec 2005
Location: Perth WA
Posts: 387
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: FG 2011 XR6 Ute Growning Noise

Does the noise change with different road surfaces? In my experience, the most common cause of "wheel bearing noise" is actually tyre noise. And a tyre can be quiet at first then quite suddenly become fairly noisy.
Cheers.
__________________
1967 XR 289 V8 Falcon (1st) - 1973 XLE 250 4spd Cortina (2nd)
1987 XF GL 4.1 Dual-Fuel Falcon (3rd) - 1996 EF 4.0 GLI Falcon (4th)
2003 BA 4.0 LPG Falcon Wagon (5th)
2016 SZ Territory TX 4.0 Petrol (6th & last?)(Sadly, written off)
2004 WRX (Retirement Toy)
5thFordWA is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 07:18 AM   #6
mike_nofx
FF.Com.Au Hardcore
 
mike_nofx's Avatar
 
Join Date: Jan 2006
Posts: 2,125
Default Re: FG 2011 XR6 Ute Growning Noise

I have a groaning noise that increases with speed. Have you tried doing a lap of the block without the wife in the passenger seat?
mike_nofx is offline   Reply With Quote Multi-Quote with this Post
6 users like this post:
Old 11-08-2018, 07:41 AM   #7
stevo73
Regular Member
 
Join Date: Jul 2012
Posts: 57
Default Re: FG 2011 XR6 Ute Growning Noise

Hi mate, why dont you try jacking the car up from the front each side seperately and try to move the wheel while it is off the ground, if it has any side to side play I would say it would be a wheel bearing.
stevo73 is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 09:54 AM   #8
Nards
Starter Motor
 
Join Date: Jul 2018
Posts: 4
Default Re: FG 2011 XR6 Ute Growning Noise

Thanks guys for your replies, I have tried driving around without wife the noise is still there...but good try anyway. I checked wheel bearings for movement and they are ok with no free play. Its not the tyres because I have checked, my guess is to replace the front hubs and see what happens, was wandering if it could be dive shaft centre bearing.

One thing I did notice is when I spin both front wheels when car off the ground they look like they are slightly out of round as if there is a kink in the wheel rim, its not by much maybe 5mm but still its there, maybe that's normal? Anyway will change hubs and see what happens...cheers.
Nards is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 10:49 AM   #9
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,197
Default Re: FG 2011 XR6 Ute Growning Noise

Quote:
Originally Posted by Nards View Post
Thanks guys for your replies, I have tried driving around without wife the noise is still there...but good try anyway. I checked wheel bearings for movement and they are ok with no free play. Its not the tyres because I have checked, my guess is to replace the front hubs and see what happens, was wandering if it could be dive shaft centre bearing.

One thing I did notice is when I spin both front wheels when car off the ground they look like they are slightly out of round as if there is a kink in the wheel rim, its not by much maybe 5mm but still its there, maybe that's normal? Anyway will change hubs and see what happens...cheers.
How did you check the tyres? I had a noise that I couldn't work out.

The tyres were only half worn Falken's but it turned out to be the fronts, changed tyres and all quiet now.
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 10:51 AM   #10
stevo73
Regular Member
 
Join Date: Jul 2012
Posts: 57
Default Re: FG 2011 XR6 Ute Growning Noise

I know its a simple thing but are the wheel nuts are definately tightened properly
stevo73 is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 11:55 AM   #11
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 23,449
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: FG 2011 XR6 Ute Growning Noise

It sounds like wheel bearing to me; has the car ever hit a curb or similar? It could also be tyres and swapping the front tyres with the rear tyres around would be a test that will confirm or eliminate that possibility.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 12:44 PM   #12
KobiXR6T
Regular Member
 
Join Date: Jul 2012
Posts: 313
Default Re: FG 2011 XR6 Ute Growning Noise

I had to do the front bearings in my BA around similar kms. Would have to check notes to be sure when I did it age wise. Edit: Was early 2014 when I replaced them.

I recall it was after a particularly raining wet season, and I didn't have any play or clunking other than the noise that would definitely increase with speed... but not necessarily when turning or loading the offending wheel.

When I removed the hub was evident which one was the problem. New ones fitted up and no noise since.
KobiXR6T is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 01:43 PM   #13
mike_nofx
FF.Com.Au Hardcore
 
mike_nofx's Avatar
 
Join Date: Jan 2006
Posts: 2,125
Default Re: FG 2011 XR6 Ute Growning Noise

Quote:
Originally Posted by Nards View Post
Thanks guys for your replies, I have tried driving around without wife the noise is still there...but good try anyway. I checked wheel bearings for movement and they are ok with no free play. Its not the tyres because I have checked, my guess is to replace the front hubs and see what happens, was wandering if it could be dive shaft centre bearing.

One thing I did notice is when I spin both front wheels when car off the ground they look like they are slightly out of round as if there is a kink in the wheel rim, its not by much maybe 5mm but still its there, maybe that's normal? Anyway will change hubs and see what happens...cheers.
They don’t always necessarily have free play when worn.

My BF didn’t have any free play even with noisy bearings but replacing ghek did fix the issue.
mike_nofx is offline   Reply With Quote Multi-Quote with this Post
Old 11-08-2018, 04:50 PM   #14
jpd80
FF.Com.Au Hardcore
 
jpd80's Avatar
 
Join Date: Jan 2010
Posts: 11,333
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Thoughtful contributions to our community 
Default Re: FG 2011 XR6 Ute Growning Noise

After a lot of kms, some tyres can get noisy, sometimes swapping right for left
and running them in the reverse direction can quieten them.
jpd80 is offline   Reply With Quote Multi-Quote with this Post
Old 12-08-2018, 06:41 PM   #15
Nards
Starter Motor
 
Join Date: Jul 2018
Posts: 4
Default Re: FG 2011 XR6 Ute Growning Noise

Yep, going to swap tyre around and try that before changing hubs.

Cheers,
Nards
Nards is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 08:59 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL