|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|
Thread Tools | Display Modes |
07-04-2010, 04:42 PM | #1 | ||
Starter Motor
Join Date: Sep 2008
Posts: 15
|
Hey,
I have a blown headlight bulb on my WQ Fez. I have tried following the instructions on how to remove the headlamp unit but I can't get it to move as it gets stuck with one of the pieces of plastic. I have booked it in to Ford to do it but if anyone knows any tips on how to do it myself (before Friday) it would be very much appreciated. Adam |
||
07-04-2010, 07:01 PM | #2 | ||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,307
|
First take off the grill cover the radiator by unclipping the clips at each side and lifting it upwards. Unscrew the two screws at the front of the head lamp and then the third screw on top. Lift out the head lamp carefully. Unplug the back case of the head lamp with the clip below. Unclip the headlight by clipping together the metal clips and take out the headlamp, making sure you do not touch the light. Replace the headlamp also making sure you do not touch the light with your skin. In case you do, wipe thoroughly with a soft tissue. Close and replace the appliances in the same way.
__________________
CSGhia |
||
07-04-2010, 07:02 PM | #3 | |||
FF.Com.Au Hardcore
Join Date: Dec 2004
Location: Central Q..10kms west of Rocky...
Posts: 8,307
|
Quote:
__________________
CSGhia |
|||
07-04-2010, 07:45 PM | #4 | ||
Regular Member
Join Date: Feb 2007
Location: melbourne
Posts: 106
|
Ugh, i tried it myself. I gave up and left it to ford as well
|
||
07-04-2010, 08:02 PM | #5 | ||
Starter Motor
Join Date: Sep 2008
Posts: 15
|
I tried for nearly an hour but it won't budge. I figure if Ford break it when they do it then they can pay for it to be fixed rather than me. Thanks anyway guys.
|
||