|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
13-06-2019, 12:12 PM
|
#1 | ||
|
ill have a beer milkshake
Join Date: Jan 2005
Location: cardbboard box Adelaide Hills
Posts: 462
|
Hi guys i wanted to pick the brains of everyone here. I recently picked up a series 2 au xr6 manual. Its got some sort of bodykit on it and im looking at getting the kit off and putting the body back to standard. Questions are did the povo pack series 2 xr6 coms without any side skirts or bar extensions etc? mine looks to be a no options xr6 by the build plate apart from being manual. any one got any pictures of such a car without body kits?
__________________
current cars: 2001 AU SII XR6 manual 2001 Nissan Patrol 1969 Isuzu Florian 1976 Chev luv (really its just a rebadged Isuzu!) 1980 Isuzu KB 4x4 |
||
|
|
|
13-06-2019, 12:33 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Aug 2010
Location: NSW
Posts: 680
|
Hi mate, if the car wasn’t ordered with a kit then a series 2 would have come bare without any front pods, side skirts or rear bar extension. If the kit was factory fitted it would be on the build plate in the engine bay otherwise if yours has a kit and no build plate them it may have either been dealer fit or fitted later in its life.
|
||
|
|
|
| This user likes this post: |
|
13-06-2019, 12:47 PM
|
#3 | ||
|
ill have a beer milkshake
Join Date: Jan 2005
Location: cardbboard box Adelaide Hills
Posts: 462
|
cheers thats what i wanted to hear, the kit fitted is a fibreglass one and not correct. there is no kit on the build plate so im happy to pull it off.
next question is the xr6 rear bar same as a standard falcon? and the bootlid spoilers were all the same?
__________________
current cars: 2001 AU SII XR6 manual 2001 Nissan Patrol 1969 Isuzu Florian 1976 Chev luv (really its just a rebadged Isuzu!) 1980 Isuzu KB 4x4 |
||
|
|
|
|
13-06-2019, 01:47 PM
|
#4 | ||
|
ill have a beer milkshake
Join Date: Jan 2005
Location: cardbboard box Adelaide Hills
Posts: 462
|
https://i.imgur.com/0M4zzbZ.jpg
Edited to show the link to your pic as it is too big to be shown on the forum.
__________________
current cars: 2001 AU SII XR6 manual 2001 Nissan Patrol 1969 Isuzu Florian 1976 Chev luv (really its just a rebadged Isuzu!) 1980 Isuzu KB 4x4 Last edited by PG2; 13-06-2019 at 01:58 PM. |
||
|
|
|
|
13-06-2019, 01:56 PM
|
#5 | |||
|
#neuteredlyfe
  
Join Date: Apr 2012
Posts: 10,630
|
Quote:
The rear bar is the same right through series II and III. The only difference is the bar insert, though, your may no longer have the bar insert on yours. EDIT: Now that I have seen the pic of your car that is definitely not a factory body kit. |
|||
|
|
|
| 2 users like this post: |
|
13-06-2019, 02:01 PM
|
#6 | ||
|
ill have a beer milkshake
Join Date: Jan 2005
Location: cardbboard box Adelaide Hills
Posts: 462
|
cheers for help with the link PG2, rear bar is long gone its got a fibreglass one there at the moment, going to have to get another standard bar and series 2 front then remove the kit.
__________________
current cars: 2001 AU SII XR6 manual 2001 Nissan Patrol 1969 Isuzu Florian 1976 Chev luv (really its just a rebadged Isuzu!) 1980 Isuzu KB 4x4 |
||
|
|
|
|
13-06-2019, 02:32 PM
|
#7 | |||
|
AU DIE HARD
  
Join Date: Nov 2005
Location: Between 2nd and 5th gear
Posts: 5,073
 
|
That all most looks like the knock off P250 bar copy, If your putting any of the factory S2 kits back on the rear the standard bar they cut about 6 " of the lower edge and sikaflex it on there to sit rite
__________________
........Age and treachery will ALWAYS overcome youth and skill....... CORTINA 250 2V POWER soon to be AUXR8 Windsor pwrd .............WINDSOR WARLORD WHO CARRIES THE CLEVO MAFIA AND BROKEN BOSSES... .........................  .........................Quote:
|
|||
|
|
|
| 2 users like this post: |
|
13-06-2019, 07:50 PM
|
#8 | ||
|
Regular Member
Join Date: Jun 2005
Location: Tweed Heads
Posts: 404
|
Looks like that XR50 kit. Think it was meant to be a mix of XR and TS50. Made/sold by awc from memory.
|
||
|
|
|
| This user likes this post: |
AU series 2 xr6 option questions?
Linear Mode
