|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
24-06-2018, 02:07 PM
|
#1 | ||
|
EXR-699
Join Date: Mar 2009
Location: Auburn NSW
Posts: 234
|
Hi All,
Looking for recommendations or Ideas. I have purchased a new cluster for the XR8, and the odometer is too low. Does anyone know of a hack or software that can do it, or does anyone know someone in the sydney area that can do the adjustment Cheers
__________________
Go Pedal = Fun Pedal AU XR8 Tickford 200kw Visit my Blog lovemyfalc.blogspot.com RIP - AU1 1999 XR6 VCT, Forever in my heart. |
||
|
|
|
24-06-2018, 02:30 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Oct 2007
Posts: 995
|
There are a few people that do it who advertise on ebay.
The going price seems to be around $100 from what I have seen. There are also a number of tools that you can buy to reset odometers but AFAIK all the tools that you can buy for under around $2,000 require that you need to pull apart the cluster, un-solder & remove the chip to program, then re-solder & replace it. |
||
|
|
|
|
24-06-2018, 09:49 PM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: Feb 2005
Location: Sth Coast NSW
Posts: 1,512
|
Should be able to swap over the Eprom chip. See ' Swapping odometer readings' http://www.fordmods.com/ford-technic...ter-upgrade-d4
There's a pic of the chip on an EF/EL falcon board here http://www.fordmods.com/ford-technic...nstruments-d14 I've done a few - they are tiny, around 5mm, so they need magnification. An electronics repair shop should be able to do it for you. |
||
|
|
|
Odometer Adjustment
Linear Mode
