![]() |
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 | ||
Starter Motor
Join Date: Apr 2015
Posts: 1
|
hi, my car sitting for six month, during these time my car was in flood
drain oil from engine, it contain water after put new oil, start engine is ok but clutch can not disengage, and can not enter any gear in it how to solve these problems ? ![]() |
||
![]() |
![]() ![]() |
![]() |
#2 | ||
Chairman & Administrator
![]() ![]() Join Date: Dec 2004
Location: 1975
Posts: 107,010
|
You'll probably find that the gearbox it contain water too and given that is what the clutch is suspended in then the clutch plate is probably not too good. You can also check the return piston (I believe they were a hydraulic clutch) or cable if they were cable.
Cheers Russ
__________________
Observatio Facta Rotae
|
||
![]() |
![]() ![]() |